Title Page

  • Site conducted

  • Client/Site

  • Conducted on

  • Prepared by

Boiler

  • Is the heat exchanger clean and are all tubes unobstructed?

  • Is the furnace clean?

  • Are the furnace bricks in good condition?

  • Is the temperature probe clear?

  • Are the firebed castings in good condition?

  • Is it clear under the firebed?

  • Is the moving grate operating?

  • Does the firebed look in good condition?

Ash Bins

  • Are the ash bins clean?

  • Are the ash bin seals ok?

Ash Extraction System

  • Does ash extraction auger operate?

  • Does ash transport auger operate?

  • Is the Ash Auger cooling pump operating?

  • Are all of the bearings ok?

  • Are rotary valves leaking?

Soot cleaning system

  • Does the compressor operate?

  • Do all soot valves operate?

  • Are there any air leaks from the soot cleaning system?

Flue Fan

  • Are ID fan belts in good condition and tight?

  • Are there spare belts on site?

  • Are the motor or bearings excessively noisy?

  • Is the flue in good condition?

  • Is depression manometer clear and functioning correctly?

Heating Pumps

  • Does Primary pump 1 operate?

  • Does Primary pump 2 operate?

  • Does secondary pump 1 operate?

  • Does secondary pump 2 operate?

  • Are any of the pumps leaking?

Fuel System

  • Are all fuel augers operating correctly?

  • Fuel silo Auger bearing satisfactory?

  • Fuel transport auger bearing satisfactory?

  • Proximity sensor located and operating?

  • Are all fuel system motors in good condition?

  • Are the gearboxs secure with no movement?

  • Does the fire damper actuator operate?

  • Does the burn back thermostat operate?

Combustion

  • Is primary fan motor operating correctly and in good condition?

  • Is primary air actuator operating and set correctly?

  • Is secondary fan motor operating correctly and in good condition?

  • Is secondary air actuator operating and set correctly?

  • Is Lambda probe operating correctly?

Control Panel

  • Does control panel isolator operate?

  • Is control panel in good condition?

  • Do control panel cooling fans operate?

  • Are control panel ventilation grills clear?

  • Are all overloads fitted in the control panel?

  • Is touchscreen operating?

  • Are all panel lights operational?

General

  • Is all pipework and plant in good condition?

  • Are there any leaks in the skid?

  • Is the pressurisation unit operating?

  • Pressure vessel set to correct pressure? (quarterly check)

  • Heating system pressure satisfactory

  • Are the safety valves letting by?

  • Are all the lights in the plant room working?

  • Are all gearbox oil levels satisfactory?

  • Is the hydraulic oil level satisfactory for moving grate?

  • Are there any oil leaks?

  • Is fuel store sealed in plant room?

  • Is the floor clean

  • Are plant room ventilation grills clear?

  • Is the plantroom clean and free from dust and pellets?

  • Are there any other issues?

Completion

  • Photos

undefined

  • Customer Signature

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.