Title Page
-
AVIATION INSTITUTE OF MAINTENANCE
-
Conducted on
-
Prepared by
-
Location
Pre-Inspection Record Search
-
Was all Airworthiness Directives complied with
Was all Service Bulletins complied with
When was the last ATC Transponder test completed
-
Select date
100 hrs. Inspection Engine
-
Is the 100 hour due
Left-hand Engine
-
Where Engine Cowling Removed
-
Engine Model
-
Engine Model Number
-
Engine Serial Number
-
Visual Check Engine compartment for condition and any fluid leaks
-
Locate Engine Oil Filter and check for security and leaks
-
Find procedure to Inspect Engine Oil Separator and clean filter element
-
Provide Maintenance Manual Reference
-
Inspect Induction Manifold for Security
-
Inspect and Clean Induction Air Filter
-
Provide Maintenance Manual Reference
-
Inspect Oil Pressure System's Security, Leaks, and Bends in the Lines
-
Provide Maintenance Manual Reference
-
Inspect Engine Mounts
-
Inspect Engine Compartment Hoses; check for deterioration, discoloration, leaks and stiffness of rubber hoses
-
Inspect Engine Compartment's wire bundles
-
Perform Compression Check #1 Cylinder
-
Perform compression Check #2 Cylinder
-
Perform Compression Check on #3 Cylinder
-
Perform Compression Check on #4 Cylinder
-
Perform Compression Check on #5 Cylinder
-
Perform Compression Check on #6 Cylinder
-
Inspect Crankcase and Sump for cracks and evidence of leakage
-
Inspect Ignition Cables for security and condition
-
Inspect Magneto for Security
-
Inspect Alternator for Security
-
Inspect Starter for Security
-
Inspect Propeller Governor's Security, Condition and Leaks
-
Inspect Fuel Pump for Security and Leaks
-
Inspect Exhaust System (Refer to the Engine Exhaust System) DO NOT REMOVE EXHAUST SYSTEM FROM ENGINE!!!!
-
Perform visual inspection of engine cylinders
Engine Close up
-
Where Cowlings Re-Installed
RIGHT-HAND ENGINE
-
Engine Model Number
-
Engine Serial Number
-
Where Engine Cowlings Removed
-
Visual check Engine Compartment for Condition and any Fluid Leaks
-
Locate Engine oil Filter and Check for security and leaks
-
Find Procedures to inspect Engine Oil Separator and Clean Filter Element
-
Inspect and clean Induction Air Filter
-
Inspect Oil Pressure System's Security, Leaks, and Bends in the Lines
-
Inspect Engine Mounts
-
Inspect Engine Compartments Hoses; check for deterioration, discoloration, leaks and stiffness
-
Inspect Engine's Compartments wire bundles
-
Perform Compression Check on Cylinder #1
-
Perform Compression Check on Cylinder #2
-
Perform Compression Check on Cylinder #3
-
Perform Compression Check on Cylinder #4
-
Perform Compression Check on Cylinder #5
-
Perform Compression Check on Cylinder #6
-
Inspect Crankcase and Sump for Cracks and Leakage
-
Inspect Ignition Cable for Security and condition
-
Inspect Magneto for Security
-
Inspect Alternator for Security
-
Inspect Starter for Security
-
Inspect Propeller Governor's Security, Condition and leaks
-
Inspect Fuel Pump's Security and Leakage
-
Inspect Exhaust System (Refer to Engine Exhaust System) DO NOT REMOVE EXHAUST SYSTEM FROM ENGINE
-
Perform Visual Inspection of Engine Cylinders
Engine Close -up
-
Are Cowling Reinstalled
