Title Page
-
Boom Lift Inspection
-
Jobsite Location
-
Job Name:
-
Manufacturer
-
Model
-
Date of Inspection:
-
Hour Meter
-
Weather - Select all that apply
-
Project Superintendent(s)
-
Operator Name:
-
Prepared by
Items for Inspection
BEFORE STARTING ENGINE
-
Has the operator been instructed in the safe operation of this type of Boom Lift?
-
Ensure Annual Inspection has been completed within the last 13 months.
-
Labels. In place, secure & legible.
-
Ensure limit switches are properly secured with no signs of visible damage and movement is not obstructed.
-
Hydraulic Pumps. Tight fittings, hoses & bolts. No damage, missing parts or leaks.
-
Hydraulic Tank. Filler cap secure & no damage or evidence of hydraulic leakage.
-
Hydraulic Oil. Level between minimum & maximum marks on site glass
-
Battery. No damage, tight connections, adequate fluid levels. Clean terminals and cable ends.
-
Engine Oil. Level in the "safe" zone. Ensure oil change interval has not been exceeded.
-
Engine Fuel Leaks. No damage or leaks from tank, shutoff valve & hoses and fittings.
-
Fuel Tank. Filler cap is secure & no visible damage or fuel leakage.
-
Engine fuel level
-
Wheel/Tire Assembly. Check all tires for damage, wear & proper alignment.
-
Manuals & Required Documents. In storage box, in good condition & legible.
-
Floorboard free of debris and garbage
-
Railings and Gate. Ensure all railings are properly positioned and secured.
-
Ensure footswitch is in good working order and has not been modified, disabled or blocked.
-
Platform Control Console. Switches in neutral position & secure. No damage or missing parts.
-
Boom. No damage or missing parts. No deformation or cracks in welds. Tight hoses and bolts & no leaks.
-
Wear Pads. No damage or missing parts. Bolts tightened.
-
Lanyard Attachment Anchorage. Attachment rings secure & no damage.
-
Personal Fall Arrest Equipment Inspected and Training Completed
-
Presence of fire extinguishers
-
Oil & fuel filter clean.
AFTER STARTING THE ENGINE
-
All-function motion alarm should sound while operating any boom and drive function.
-
Turn main power disconnect switch to off position. Result: Aerial platform functions should not operate.
-
Push in Red emergency stop button. Result: Engine should shut down and aerial platform functions should not operate.
-
Test Horn
-
Test Brakes: Drive forward, then reverse at full speed. Remove your foot from footswitch. Result: Aerial platform should come to an instant and abrupt stop
-
Outriggers/stabilizers operate properly.
-
Upper drive control interlock mechanism is functional (i.e., foot pedal, spring lock, or two hand controls).
JOBSITE INSPECTION
-
Floor conditions: Holes or drop-offs, ditches, floor obstructions, overhead obstructions, electrical cords, wind or weather conditions, inadequate surface support
-
Perform a thorough jobsite inspection prior to operating the aerial platform, to identify potential hazards in your work area.
