Callan Quality Inspection -- Apex 1 -- Galliards

• please provide site for reference

  Select

• Document reference

• Conducted on

  Date

• Prepared by

• PROVIDE SNIP OF COMPARTMENT / APARTMENT

  Media

• LOCATION = BLOCK - COMPARTMENT REFERANCE

SETTING OUT

• Has the setting out been done correctly and is it to the latest drawings ?

  Yes

  No

  N/A

• Are the windows and door openings constructed to the correct width, height and plumb ?

  Yes

  No

  N/A

• Confirm coursing, perps and plumb are within acceptable tolerance ?

  Yes

  No

  N/A

• Have movement joint been set out as per approved design and as per site requirements ?

  Yes

  No

  N/A

BRICKWORK / BLOCKWORK

• Have the bricks been mixed as per manufacturers instructions ?

  Yes

  No

  N/A

• Have the specified cavity ties been used and are the ties installed as per manufacturer’s instructions- correct spacing/embedment ?

  Yes

  No

  N/A

• Have lintels been installed as per manufacturer instructions including correct bearing and correctly embedded ?

  Yes

  No

  N/A

• Has Brick reinforcement been installed where applicable and has it been installed as per manufacturers instructions ? (where Applicable)

  Yes

  No

  N/A

• Have the Cavity's been left clean and tidy and have coring holes been installed correctly ?

  Yes

  No

  N/A

• Has the weep vents been installed as per the manufacturer’s instructions / specified centres ?

  Yes

  No

  N/A

• Has the work area been left clean and tidy once work have been completed ?

  Yes

  No

  N/A

Keyfix (Non-combustible) cavity tray

• Has the KEYFIX cavity tray been installed as per approved design (non-combustible) ?

  Yes

  No

  N/A

• Has the Cavity tray been installed as per manufacturers instructions (continuous DPC and on openings) ?

  Yes

  No

  N/A

INSULATION

• Has the correct insulation been installed per approved design ?

  Yes

  No

  N/A

• Rainscreen Duo Slab 220mm x 600 x 1200mm -- as per design
  Rainscreen Duo Slab 180mm x 600 x 1200mm -- as per design

• * Has the brick tie channel be installed as per manufacturers instruction and with correct spacing ?

  Yes

  No

  N/A

• Has insulation been installed as per manufacturers instructions and is tightly abutted with no gaps ?

  Yes

  No

  N/A

• Have compression sleeves been installed as per manufacturers instructions ? WHERE APPLICABLE

  Yes

  No

  N/A

MASONRY SUPPORT

• Has the masonry support been installed as per manufacturers instructions ?

  Yes

  No

  N/A

• If marked N/A then no masonry support is on this compartment / apartment

• Have bolts been torqued as per manufacturers specification and checked by a competent person ?

  Yes

  No

  N/A

• If marked N/A then no masonry support is on this compartment / apartment

• Have pull out tests been carried out to post fix bolts if required ?

  Yes

  No

  N/A

FIRE BARRIER / CAVITY BARRIER

• Fire barrier type / manufacturer? SIDERISE EW/FS120BJ/1.2-1.2/P -1200x1200x120mm Fixing bracket = AN/BRKT/B355/G - Siderise RFT120 Aluminium Jointing Tape (120mm x 45m)

• Has the fire barrier been approved by the architect and is installed as per approved design/ installation guides?

  Yes

  No

  N/A

• Have the correct fixings/brackets been installed with the correct spacing as per manufacturer instructions ?

  Yes

  No

  N/A

• Has the fire barrier/cavity barrier been installed correctly and is tightly abutted with no gaps ?

  Yes

  No

  N/A

• Has a Non-combustible DPC been installed between the cavity barrier and supporting structure ? (OBEX) where applicable

  Yes

  No

  N/A

STONEWORK (COPINGS/WETCAST STONE)

• Have fixings been installed as per manufacturers specification ? IF MARKED N/A THEN THERE IS NO STONEWORK ON THIS LEVEL !

  Yes

  No

  N/A

• If marked N/A then no stonework is on this compartment / apartment

• Have stones been installed as as per approved design ? IF MARKED N/A THEN THERE IS NO STONEWORK ON THIS LEVEL !

  Yes

  No

  N/A

• If marked N/A then no stonework is on this compartment / apartment

ADDITIONAL INFORMATION

• Please provide any additional relevant information/notes/photos here IF REQUIRED

  Media

NOTES

• QA Sheets issued as work is progressing (works must be inspected by MC within 24 hrs of sheet submittal and will be deemed accepted after that period to ensure no delay to site progress)

SIGNATURES

• 1) ON BEHALF OF CALLAN CONSTRUCTION

  Sign

• 1 ) DATE

  Date

• 2) ON BEHALF OF PRINCIPLE CONTRACTOR--

  Sign

• 2 ) DATE

  Date

undefined