Title Page

  • Site Audited

  • undefined

  • Date of Inspection

  • Auditor

Untitled Page

A. Site Access/Egress and General Site Safety Information

  • Are external approach roads free from mud or obstruction? Any litter issues?

  • Is access/egress to the site suitable and sufficient for both vehicles and pedestrians?

  • On site, are vehicles/plant and pedestrians segregated from each other where reasonably practicable?

  • Are sufficient security arrangements in place to deter and prevent unauthorised entry to the site?

  • Is the site office and layout clearly signed?

  • Are all mandatory Health & Safety (H&S) documents displayed as per legislative requirements? • Company’s H&S policy ‘Statement of Intent’ signed by a senior person within the last 12 months? • Current employer’s liability insurance certificate? • H&S law poster complete with current, and correct information? • F10 (if applicable)?

  • Is there a H&S Notice board displayed and does it clearly and legibly display the following? • Relevant information such as daily activities and/or top hazards; • Relevant safety bulletins or notices

  • Is there an Environmental Management Plan (including environmental emergency response) and is it adequate, current, clear, and legible?

  • Is a Traffic Management Plan displayed and is it adequate, current, clear, and legible?

  • Is there an effective booking in/out process in place and is it used correctly?

  • Are speed limits in place and clearly visible and adhered to?

  • Is the internet connection suitable for the Plant operations needs and requirements?

  • Are communication means suitable and available to alert the emergency services? (landline, mobile signal) Is there a direct link to the Fire Service?

B. First Aid, Fire, and Emergency preparations General

  • Is access for emergency service vehicles clearly indicated, kept clear, and unobstructed at all times?

  • Are First Aid, Fire, and emergency procedures prominently displayed, clear, and legible?

  • Are Emergency Assembly Points suitably located and signed as such?

  • Are all emergency escape routes clearly indicated, kept clear, and unobstructed at all times?

  • Has the route to the local hospital route been identified and is it clearly displayed?

C. First Aid

  • Is there an adequate number of First Aid posts suitably located and signed as such?

  • How are First Aiders alerted in the event of an accident requiring their assistance?

  • Is the number of trained First Aiders adequate for the size and complexity of the site?

  • Is the standard of training for First Aiders adequate for the perceived risks on the site?

  • Are all shift patterns adequately covered by First Aid provision?

  • Are all first aiders current? Are copies of their qualifications available?

  • Are photos and contact details of First Aiders prominently displayed at suitable locations?

  • Is an Accident Book available and kept up to date?

  • Is the Accident Book managed as per The Health & Safety (First Aid) Regulations and the General Data Protection Regulation (GDPR)?

  • Is the procedure for accident and incident reporting suitable and sufficient and compliant with RIDDOR 2013 and GDPR?

  • Is the provision of First Aid equipment (including safety showers and eyewash stations) suitable and sufficient for the site?

  • Is someone designated responsible for maintaining the first aid equipment?

  • Is all first aid equipment (including safety showers and eyewash stations) in good condition and in date?

  • If safety showers and/or eyewash stations are provided, is there a formal procedure for their regular inspection, service, and maintenance, and who is responsible for this?

D. Fire

  • Is a suitable and sufficient Fire Risk Assessment in place and available? Is it current? Are there any concerns still to be actioned?

  • Is fire detection and alarm equipment suitable and sufficient for all areas of the site?

  • Can the fire alarm be clearly heard by everyone on the site?

  • Are suitable fire prevention measures in place and complied with? Are there suitable procedures in place for the regular inspection, service, and maintenance of the fire safety systems?

  • Is the number of Fire Marshals/Wardens adequate for the size and complexity of the site?

  • Are photos and contact details of Fire Marshals prominently displayed at suitable locations?

  • Do all Fire Marshals understand their role and responsibilities?

  • Is there an adequate number of Fire Points suitably located and signed as such throughout the site?

  • Do all Fire Points contain suitable firefighting equipment and is it in good condition? Do all fire extinguishers have evidence of regular service and inspection (within last 12 months)?

  • If fire water tanks are provided, do they contain sufficient quantity, and are they regularly inspected and maintained?

  • Has practical firefighting training been given to a sufficient number of operatives at the site?

  • Are fire drills with full evacuation regularly practised? What date was the last Fire Drill?

E. Other Emergencies and Preparedness

  • Are adequate procedures in place to ensure safety in the event of a power failure?

  • Are adequate procedures in place to warn and control of a significant gas escape or uncontrolled release of gas?

  • Are adequate procedures in place to warn and control of a significant chemical leak, spillage, and/or uncontrolled release of a substance?

  • Are adequate procedures in place to warn and control any potential issues caused by natural forces such as floods or severe thunderstorms?

  • Is suitable lightning protection in place and does it cover all relevant areas of the site?

  • Are emergency shutdown procedures in place for any plant and are these procedures clearly displayed or available?

  • Is authority required to perform an emergency shutdown of any plant if required? If so, who by?

  • Have all relevant personnel been suitably trained to perform an emergency shutdown if required? Provide evidence

  • Is a formal restart procedure in place following an emergency shutdown and what authority is required prior to initiation?

F. Static Plant, Machinery and Equipment, and Portable Electrical Equipment

  • Does all static plant, machinery, and equipment appear to be in good condition?

  • Is all applicable plant, machinery and equipment inspected and maintained as per PUWER 98, and is evidence available?

  • Are all required inspection, maintenance, service, and compliance events forecasted and arranged?

  • Are records available for all completed inspection, maintenance, service, and compliance events?

  • Are there any outstanding maintenance, service, inspection, or compliance events? If so, provide details

  • Is there a current single calibration register maintained that lists all applicable tools, equipment, machinery, and plant? Are there any items overdue calibration?

  • Is there a suitable procedure for fault reporting and does it include feedback to the originator?

  • Does the fault reporting procedure have a priority system whereby faults must be resolved within a stated timeframe?

  • Do all operatives fully understand the fault reporting system and how to use it?

  • Are electrical extension cables used and if so, are they of an appropriate grade and voltage and CE/UKCA marked?

  • Is PAT testing carried out for all applicable equipment and is a register kept of all inspection results? (new equipment requires a visual inspection only recording)

  • Are all fixed electrical installations regularly inspected and an Electrical Installation Condition Report produced (EICR) also referred to as a Periodic Inspection? (portable cabins used as permanent installations also meet this requirement). Provide date of last inspections and type of inspection

  • Is there a quarantine area for applicable items that are awaiting service, inspection, calibration, repair, or replacement?

Is there a system of auditable and documented authority from senior management for any maintenance work or activity outside of the normal intended operation that includes changes or adjustments?

  • Are RAMS, Safe Working Instructions, Safe Systems of Work or equivalent available and complied with for all work processes and/or activities?

  • Is a robust and suitable Permit to Work system in place and does everyone fully understand and comply with it?

  • Does the Permit to Work cover all required tasks and activities? Is there a comprehensive list of all activities that require a PTW?

  • Are there any discrepancies with any previously completed permits?

  • Is the LOTO procedure in place and used effectively where required?

  • Are suitable precautions in place for detecting over pressurisation and raising an alarm?

G. Mobile plant/vehicles

  • Are receipt inspections carried out and recorded for all hired in plant? (visual inspection only)

  • Are daily operator prestart checks of mobile plant completed, and are records retained and available?

  • Is the equipment being serviced in line with the maintenance schedule, is the operator carrying out the required greasing up and oil checks etc? Is evidence of this available?

  • Is a suitable fault reporting system in place and used effectively?

  • Are there any obvious faults or defects apparent on any plant or vehicles and if so, have they been reported?

  • Is there an operator manual in the cab of the plant? Is it correct for the type and model of machine and clear and legible?

  • Where applicable, is there a load rating chart fixed in the cab and is it clear and legible?

  • Are Flashing Beacons in use on all site plant and vehicles?

  • Are any audible or visual reversing alarms fitted and functional?

  • Are seat belts worn? Are green beacons used to indicate this?

  • Are keys removed from the plant or vehicle when not in use, and are they kept secure?

  • Is all plant operated by competent persons and is evidence available of this?

H. Training/Competence

  • Is there a comprehensive training matrix in place, available and maintained that shows all training completed, and forecasted renewal and refresher dates?

  • Are refresher training carried out at suitable intervals and is this recorded?

  • Is all inhouse training adequate with details suitably documented and recorded? Does it include a means and criteria for assessing and measuring competence?

  • Is all plant operated by qualified, current, and competent operators? Are records of qualifications and/or competence available and are they current?

  • Are there any areas of work activity that operatives and/or management have not been suitably trained?

  • Have all relevant persons been adequately trained in the PTW and LOTO systems and has this been recorded?

  • Have all staff on site received basic training on emergency procedures and are records retained?

  • Are toolbox talks regularly carried out and records retained and available? What was the topic of the last talk and when?

  • Is the induction process suitable and sufficient for site staff, contractors and visitors, and are adequate records kept?

  • Have all personnel working at or visiting the plant been suitably inducted?

  • Are copies of training certificates & relevant qualification cards for employees, agency staff & subcontractors retained?

I. Personal Protective Equipment (PPE)

  • Is there a register of PPE issued to individuals that shows type of PPE issued, date of issue, date of renewal (if applicable), and record of training in its use and care?

  • Is there a register of breathing apparatus issued to individuals that shows type of apparatus issued, date of issue, date of testing, inspection and maintenance, and record of training in its use and care?

  • Are the mandatory 3 monthly air quality tests of the compressed air to breathing apparatus carried out and recorded, and do these tests include water and dew point measurements?

  • Is a record of Face Fit testing available within the previous 3 years for all applicable operatives and management? Does it relate to the type of PPE used?

  • Is the correct type of PPE available for each hazard and are operatives trained to use it?

  • Is PPE used correctly where applicable, and is it maintained, and stored correctly?

  • Is a stock of PPE available for replacement as required or for visitors/delivery drivers etc?

  • Are Vehicle Marshals, Slinger/Signallers and Banksmen adequately recognisable as such?

J. Welfare

  • Do the provided facilities comply with The Workplace (Health, Safety and Welfare) Regulations 1992?

  • Are the facilities suitable and sufficient for the number of expected users?

  • Are the facilities maintained in a clean, hygienic condition?

  • Is food stored in way to prevent the attraction of vermin?

  • Is appropriate health, safety, and environment, information displayed in welfare areas?

  • Are smoking areas provided for those that smoke? (not mandatory)

  • When applicable, are adequate COVID control precautions implemented and used effectively?

K. Environment

  • Is there a site waste management plan in place? Does it include waste streaming?

  • Housekeeping is the site clean and tidy? Free from excessive litter, waste, and debris?

  • Is there an effective Environment Emergency Response Plan in place?

  • Have all staff been trained in the Emergency Response Plan? (Provide details)

  • Is there any evidence of leaks or spills of any fuels, oils, or other substances?

  • If fuel and/or oils are stored, is the bunding suitable and sufficient and empty of water or contaminants?

  • Are suitable quantities of spill response bins/bags available to support the works being undertaken and in refuelling areas?

  • Are plant nappies and/or drip trays used to contain minor leaks or spills?

  • Are vehicles and plant switched off when idle where reasonably practicable to do so?

L. Control of Substances Hazardous to Health (COSHH)

  • Is there an up to date COSHH register and are all substances listed on it?

  • Are all substance containers clearly and correctly marked and contents identified?

  • Have COSHH assessments been completed and Safety Data Sheets (SDS) made available for all substances on site that present a significant risk?

  • Are there any residual risks or risks remaining that are not adequately controlled?

  • Are appropriate first aid facilities provided in COSHH storage areas? (showers, eyewash etc)

  • Is air monitoring and/or health surveillance required for exposure to any substances? If so, is there evidence of it implemented and carried out?

  • Are any local exhaust ventilation (LEV) systems installed and are they inspected and maintained as per legislation and HSE guidance? (Thorough examination and test every 14 months as per COSHH Reg 9 and HSG 258)

  • Are all substances stored as per the requirements and/or recommendations of the SDS?

  • Are gas cylinders stored in accordance with BCGA COP 44 2016?(stored upright, weather protected, ventilated, different types and full and empty separated, quantities, and correct distance from buildings etc)

  • Are flammable liquids stored as per HSG51? (The Storage of Flammable Liquids in Containers)

  • Are adequate control measures in place to contain spillage and prevent ground contamination?

  • Are adequate hygiene measures in place to protect against bacterial and viral infections, pathogens, and Zoonoses?

M. Confined Spaces

  • Have any Confined Space areas been clearly identified with the correct signage?

  • Are suitable documented procedures in place for all activities in confined spaces?

  • Do the procedures above include atmospheric testing, communication, ventilation, permits and Respiratory Protective Equipment (RPE)?

  • Are all radios, tools, and electrical equipment intrinsically safe for any activities carried out in Confined Spaces?

  • Is there a valid and tested rescue plan in place for activities in Confined Spaces?

N. Lifting Operations

  • Is a Permit to Work used for all lifting operations?

  • Are lifting plans produced for each lifting operation? (Provide evidence)

  • Is an appointed person designated to control the lifting operations?

  • Is there a lifting equipment register in place that includes current certificates for all lifting equipment and accessories?

  • Is all applicable plant, machinery and equipment inspected and maintained as per LOLER 98, and is evidence available?

  • Is all lifting equipment being stored, and used correctly?

O. Work at Height

  • Is a Permit to Work used for all work at height activities?

  • Is the hierarchy of risk control used where applicable? (Avoid, prevent, mitigate)

  • Have all relevant staff been appropriately trained to work at height and is evidence of this available?

  • Are all access to height systems suitable, safe and sufficient and regularly inspected? (stairs, ladders, MEWP’s, etc)

  • If ladders are used, are they of the correct type for use, stored, maintained, and inspected with evidence in a register?

  • If scaffold is used, does it comply with applicable legislation and is a record maintained of statutory inspections? (including Haki stairs)

  • Are excessive materials, tools, or equipment stored correctly and within safe loading limits?

  • Do all access points at height have selfclosing gates installed to prevent a potential fall from height?

  • If trapdoors are used on scaffold or height access systems, are they kept closed where applicable?

  • If MEWP’s are used, do they comply with LOLER and PUWER requirements, and are operatives suitably trained, qualified, and competent?

  • If MEWP’s are used, are the basket load restrictions adhered to with regards to numbers of people, and weight of tools, equipment, and materials?

  • Are exclusion zones erected and maintained during work at height to prevent injury from dropped objects and contact with machinery?

  • Are hand tools used in elevated work areas tethered to prevent the risk from dropped objects?

  • Are safe unloading/loading arrangements in place which reduce the need to climb onto flatbed lorries or their loads?

P. Manual Handling

  • Have manual handling assessments been carried out for all operations that present a significant risk or for those that are repetitive?

  • Are mechanical lifting and moving devices used in preference to manual lifting where reasonably practicable?

  • Are all manual handling operations adequately controlled?

  • Have all operatives received adequate training in manual handling techniques for any tasks that may be required of them and are records available?

Q. Vibration & Noise

  • Have suitable and sufficient risk assessments been carried out for all potentially applicable items (K factor used?)

  • Is the risk of Hand Arm Vibration (HAVS) and whole body vibration (WBV) adequately controlled? (Provide details)

  • Do all applicable vibratory tools appear to be in good condition and free from defects, and could they be improved to reduce the risk further?

  • Have all applicable workers received information and training on the risk of HAVS/WBV and the control measures required?

  • Is health surveillance required for HAVS/WBV and if so, is there evidence of this being implemented and carried out?

  • Have suitable and sufficient noise risk assessments been carried out for all applicable items?

  • Is the risk of Noise Induced Hearing Loss adequately controlled?

  • Are hearing protection zones established, demarcated, and signed? (mandatory where Noise levels are 85dB or over)

  • Is suitable hearing protection worn in areas where Noise levels are 85dB and over (mandatory)?

  • Is health surveillance required and if so, is there evidence of this being implemented and carried out?

R. Dangerous Substances and Explosive Atmospheres Regulations (DSEAR)

  • Have all substances under DSEAR been identified and suitably recorded?

  • Has a DSEAR Assessment been completed for all applicable substances and is it suitable and sufficient, regularly reviewed and updated, and available?

  • Are suitable control measures in place for all substances identified under DSEAR?

  • Have suitable emergency arrangements/plans been developed and implemented for residual risks under DSEAR?

  • Have all ATEX (ATmospheres EXplosive) zones been identified and are they prominently and clearly marked as such?

  • Are all tools, machinery, and equipment used in ATEX zones suitable and ATEX rated and/or intrinsically safe?

S. Structures and Pipework

  • Are all structures in good condition and free from faults, defects, and/or damage?

  • Is all pipework marked in accordance with BS1710?

Lists

  • Major NC

  • Minor NC

  • OFI

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.