Title Page

  • Site conducted

  • Conducted on

  • Prepared by

  • Location
  • Make

  • Model

Pre-Start Checklist

  • Clean the outside of the machine.

  • Check that nuts and screws are tight.

  • Check air filter and clean if necessary.

  • Check the chain brake operates and chain catcher is undamaged.

  • Remove bar.

  • Check/clean the bar groove and oil hole in the bar.

  • Grease the sprocket tip.

  • Check the drive sprocket for excessive wear and report if necessary.

  • Check the saw chain for damage or wear.

  • Refit bar upside down.

  • Refit and tension chain.

  • Sharpen or replace the chain as required.

  • Fill fuel and oil tanks ensuring no leaks are evident.

Operational Checks

  • Check that the stop switch works correctly.

  • Check oil flow prior to first cut.

  • Constantly monitor chain sharpness and tension. Sharpen and tension as needed.

Post-Operative Maintenance

  • Clean and inspect machine.

  • Remove guide bar and chain and clean area around the clutch drum.

  • Refit bar and chain and correctly tension.

  • Clean the work area and report any faults found.

  • Store the saw in a clean, dry environment.

Completion

  • Recommendations

  • Sign-off (Full name and Signature)

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.