City & Guilds (5357) Level 3 NVQ UNIT 109 - 23 APPLY DESIGN AND INSTALLATION PRACTICES AND PROCEDURES

• Site conducted

  Select

• Student Name

• Assessment Method

  Assessor Observation

  Student Reflective Account

• Conducted on

  Date

• Prepared by

• Location
  Address

• Job Description

Assess and apply appropriate procedures to include: adopting appropriate PPE ,following a safe system of work using risk assessments and method statements, selecting correct tools & equipment L.O 1.1

• What tools and plant equipment where needed to carry out your work safely?

What health and Safety checks/customer checks have been carried out before commencing work. LO 1.1/1.2/1.3/1.4/1/5

• Safe isolation

• Method Statement

• Risk Assessment

• Warning notices and barriers

• Correct PPE worn

• Check to confirm planned locations for wiring systems in terms of; • Cosmetic appearance • External influences

• Permits to work

• Check to confirm equipment complies with specification

• Checks to confirm compatibility of wiring/equipment with other services

• Any pre-work damage reported

• Suitable storage in place

• Check materials and equipment are correct quantity and not damaged

• Site ready for works to begin

• Authorisation for work to begin confirmed

Customer/Expert Witness Signature's

• Customer Name

  Sign

• Expert Witness Name

  Sign

Use sources of information to enable the installation of wiring systems, enclosures and associated equipment to be carried.

• Specifications

• Work schedules/programmes

• Manufacturers’ instructions

• Layout drawings

• Other appropriate source of information (eg the Wiring Regulations, other plans or diagrams, ‘approved documents’, building regulations

Use appropriate measuring and marking out techniques which are appropriate to the wiring system, wiring enclosure and/or associated equipment that is being installed L.O 3.1

• Describe what measuring and marking out techniques are to be used during the installation

Install cables in accordance with the wiring regulations, the installation specification and programme of work (minimum 5 across 2 jobs) L.O 3.2

• Single core cables

• Multicore insulated

• PVC-PVC flat cable

• MICC

• Fire resistant cable

• PVC SWA

• GSWB steel braid cable

• Data cable

Install containment in accordance with the wiring regulations, the installation specification and programme of work (minimum 3 across 2 jobs) L.O 3.3

• PVC Conduit or PVC Trunking

• Metallic conduit or Metallic Trunking

• Cable tray

• Cable basket

• Ladder system

• Ducting

• Modular wiring system

• Busbar system

Install equipment in accordance with the wiring regulations, the installation specification and programme of work (minimum 5 across 2 jobs) L.O 3.4

• Isolators or switches

• Socket outlets

• Dis Boards/consumer units

• Luminaires

• Motors/ motor controls

• Overcurrent devices

• Electric Vehicle Charging Point

• Control panels

• Data sockets/ Wifi Router

• Fire detection/alarms

• Other (please state)

Communicate with others professionally and appropriately to aid the effective installation of the wiring system/equipment L.O 3.5

• State methods of communication utilised between other trades and professionals during this installation

Dispose of waste materials in accordance with site procedures and statutory requirements L.O 3.6

• Describe how, in accordance with site procedures and statutory requirements, how waste has been disposed of.

Ensure the installed wiring system(s) and enclosure(s) meet specified requirements L.O 4.1

• Are the correct type and fit for purpose

• Meet the installation specification/other relevant plans/instructions

• Are installed in accordance with the Wiring Regulations (BS 7671)

• Are installed in accordance with any relevant manufacturers’ instructions

The behaviours below are embedded into the performance units in this workplace logbook. These behaviours are part of the apprenticeship, and an expert witness and/or your assessor will also assess you against them. They will record and give feedback on your performance against these behaviours.

• Behaviour 1 (B1): Works reliably and effectively without close supervision

• Behaviour 2 (B2): Accepts responsibility for the work of themselves and others

• Behaviour 3 (B3): Accepts, allocates and supervises technical and other tasks

• Behaviour 4 (B4): Uses oral, written and electronic methods for the communication of technical and other information

• Behaviour 5 (B5): Works effectively with colleagues, other trades, clients, suppliers and the public

• Behaviour 6 (B6): Undertakes work in a way that contributes to sustainable development

• Behaviour 7 (B7): Maintains and enhances competence in own area

• Behaviour 8 (B8): Exercises responsibilities in an ethical manner

Assessor and Expert Witness feedback

• Assessor Feedback

• Expert Witness Feedback

Student Signature

• By the act of making this submission I am declaring that this is all my own work and that: • The work has not, in whole or in part, been knowingly submitted elsewhere for assessment • Where the submission includes work from a previous assessment this has been identified • Where materials have been used from other sources it has been properly acknowledged • If this statement is untrue, I acknowledge that an assessment offence has been committed Attention is drawn to the plagiarism, collusion and cheating policies of both the centre and of the awarding body. Proven incidents of plagiarism, collusion or cheating can result in a student being withdrawn from a qualification. I confirm that I have read and understood the above statements on plagiarism and collusion. I confirm that I have not committed plagiarism when completing the work contained in this evidence, nor have I colluded with another student in the preparation and production of this work. I am satisfied with the way the learning activity/Assessment(s) was conducted and with the outcome(s). I agree that the information provided here is an accurate account of what has taken place

  Sign

Expert Witness Signature

• As the expert witness I can confirm that all the work carried out in this unit has been done by the student named above under my supervision to the required standards.

  Sign

Work Based Tutor Signature

• I agree that the information provided here is an accurate account of what has taken place.

  Sign