Class 2 to 9 - Generic Site Inspection - Construction Audit Team V2

• Audit Title - date/block/section/class of building - description

• Project ID or DA/BA:

• Conducted on

  Date
• Location
  Address

• Select personnel

  Select Dominic Hides Reuben Gaze Brian Connors Max Rafferty Ajit Buddhadasa

  • Dominic Hides
  • Reuben Gaze
  • Brian Connors
  • Max Rafferty
  • Ajit Buddhadasa

• Contact person/ person spoken to / phone number and email address if applicable

SCOPE

• This report is an audit tool for the Building Inspector/Compliance Auditor to identify compliance with the Building Code of Australia/National Construction Code, Building Act, regulations and Australian Standards.

PURPOSE

• This report is intended as a generic site inspection of Class 2 to 9 Building sites and compliance with Building Code of Australia/National Construction Code and Building Act, regulations and Australian Standards

OBJECTIVE

• Inspectors are to use the information gained from pervious site visits and paper audits to ascertain if the building has been built in accordance with the approved plans

METHODOLGY

• Inspectors will use data from previous the previous site visit and paper audit, 'e development' and 'Objective' and apply this information to the Class 2 to 9 development. . Inspectors will use the audit tool and iPad to gather information. Inspectors will use tape measures and digital laser levels to accurately record information. Inspectors will travel to the site locations using the Construction Audit Team vehicle

RESULT

• The results of the inspections will be uploaded to the Construction Audit Team data base and objective. Results will be recorded monthly.

• What was inspected

• Add media

  Media