Sinks, hand basins and their surrounds, including splash backs, ledges, inner and outer surfaces of bowls, overflows, plugs, drain holes, taps, supports, pipes, traps etc, to be dry and free of all soilage, hairs, smears, debris etc, after cleaning. Taps to be polished. No build up of soilage or staining materials to be permitted.
Urinals and bowls to be free of scale, debris or other obstructions after cleaning. The inner surfaces of bowls and stalls to be thoroughly scrubbed during cleaning. All associated pipe work and cisterns to be free of smears, streaks and stains after cleaning. No build up of soluble or staining materials on stalls, bowls, pipes, cisterns, and related surfaces to be permitted.
All interior surfaces including rims and other hidden areas of WC bowls to be thoroughly scrubbed during cleaning, the exterior of bowls, seats, seat hinges and associated pipe work and cisterns to be thoroughly cleaned so as to be free of all marks, streaks and stains. No build up of soilage to staining materials to be permitted. Particular attention to be paid to areas less accessible such as flushing rims, pipe connections, and seat pillars and hinges.
The exterior of toilet paper holders, towel cabinets and any other fixtures and fittings which may occur to be free of all streaks, smears, stains and other soilage after cleaning.
All mirrors to be cleaned so as to be free of smears, stains and marks.
All chrome, copper, brass and other metal finishes to be maintained so as to be free of all tarnish, stains, verdigris and similar materials.
In addition to the daily cleaning as specified above all toilets will be serviced once during the course of the working day, the service will consist of wiping down surface, sinks and toilet seats and cleaning floors to remove any spills or waste material. Also the supply of soap, towels and any other consumables will be checked and replaced as necessary.
Sinks, and their surrounds, including splash backs, ledges, inner and outer surfaces of bowls, overflows, plugs, drain holes, taps, supports, pipes, etc. To be dry and free of all soiling, scale, hairs, smears, stains, debris etc.; after cleaning. Taps to bee polished. No buildup of soiling, scale or staining materials to be permitted.
All chrome, copper, brass and other metal finishes to be maintained so as to free of all tarnish, stains, verdigris and similar materials.
The external surfaces of kitchen appliances to include cupboards, refrigerators, vending machines, dishwashers and their surrounds to be damp wiped.
The internal surfaces of kitchen appliances (excluding vending machines), cupboards, including refrigerators, to be thoroughly washed.
Following the details listed below ensure that all tenant entrances are maintained to the highest possible standard at all times
The areas in front and to the sides of all entrances will be maintained free from debris, litter, spills etc.
After cleaning, both sides of entrance and reception area glass to be free of all marks, streaks and smears
All streaks and runs to be removed from surrounds as they occur
Vacuumed carpets to be free of surface litter and debris. No build up of dust, fluff or similar soilage to be permitted at edges, under furniture or in corners.
All stains to be removed as they arise by spotting.
No static charge shall be allowed to build up on any carpet.
Entrance barrier mats to be cleaned so as to provide an effective barrier to the ingress of soil and water by removing as far as possible accumulations of soilage within the mat.
Wells after cleaning to be free if all accumulation of litter, debris and soilage in general. Tiled frontages to be wet mopped.
The contractor shall also provide mats for building entrances and other locations, which shall be changed as directed by RSMD staff, but no less than 1 year.
Stairs and intermediate landing to be maintained so as to be free of dust, debris, tarter ears, smears, fluff and any other soilage. Particular attention to be given to edges, corners, strings and risers to ensure no accumulation or build up of soilage occurs.
Banister rails and balustrades, including side panels, to be free of dust after dusting. Specialist products to be used on appropriate services. I.e. Brass or wood cleaning
Spot cleaning and damp wiping to remove all stains, marks, streaks, finger marks or other soilage.
All surfaces to be free of dust and smears after dusting.
All finger marks, smears, stain and general soilage to be removed during cleaning by spot cleaning, damp wiping or washing as appropriate, to leave surfaces clean, dry and smear free.
No smears, streaks or buildup of soiling, particularly on the skirting and door kick plates to be permitted.
Walls to be free of dust and smears after dusting
Brightwork and door furniture to be maintained so as to be tarnish free. Metal polish to be washed from brightwork before drying and buffing
To be free of dust, smears, streaks and stains after cleaning.
Dust to be suction cleaned from voids between secondary glazing and windows.