Title Page

  • Conducted on

  • Prepared By

  • Project

  • Main Contractor

  • Block

  • Floor Level

  • Area/Room

Internal Partitions & Celings : Spec & Inspection Q&A

Partitions - Boarding

  • Closure cert issued by the Main Contractor.

  • The correct type of boards used as per drawings & specs to both sides of the partition.

  • Correct drywall screws length are used for each layer of board installed

  • Correct acoustic insulation installed in partitions as per spec and secured in place?

2nd Fix of MF ceiling

  • Void Closure cert issued by the Main Contractor?

  • Ceilings are boarded using the correct boards as per drawings & specs?

  • Correct number of fixings installed as per the Manufacturers Installation Guide.

Skim finish

  • Corner / Stop beads installed correctly and plumb.

  • Plasterboard joints on Partitions & Ceilings are filled as per the Manufacturers Installation Guide.

  • Tape & Joint / SkimCoat installed as per the Manufacturers Installation Guide.

Waste management

  • 1 - Debris and waste cleared out

  • 2 - Work area cleaned

  • 3 - Waste segregated as per guidelines

  • Any other issues?

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.