Title Page

  • Site conducted

  • Conducted on

  • Prepared by

  • Location

Site Checklist

  • Do workers have a safe route to their place of work?

  • Is the site fenced and secured so that the public cannot gain access?

  • Are members of the public, such as people passing by the site, protected e.g. from falling material, moving machinery?

  • Do vehicles have visual and reversing aids fitted where needed e.g. reversing camera, convex mirror?

  • Is the site tidy and well laid out?

  • Are appropriate safety signs in place e.g. traffic routes, authorised personnel, PPE?

  • Are welfare facilities e.g. toilets and canteen, adequate and are kept clean?

  • Have workers been instructed and trained on safe manual handling?

  • Is appropriate lifting equipment provided for handling heavy loads; is it suitable for the job, certified and inspected regularly?

  • Have existing services and equipment maintained and frequently inspected by a competent person?

  • Are electrical systems and equipment maintenance and frequently inspected by a competent person?

  • Is the only power supply being used 110V and are there adequate transformers points on site?

  • Are collective measures in place to stop workers and objects from falling e.g. netting, scaffolding?

  • Are scaffolds erected, altered and dismantled by competent CSCS scaffolders?

  • Are scaffolders inspected at least weekly by a competent person and the results records?

  • Are any remedial works identifed during scaffold inspections complete?

  • Where collective fall protection measures are not possible, are persons working at height using appropriate fall arrest/restraint equipment?

  • Are ladders and stepladders used only for light work of short duration and when there is no other choice?

  • Have lifts and hoists been properly installed, certified and checked by competent people?

  • Are all people on site wearing the correct personal protective equipment e.g. footwear, hard hat?

  • Are suitable protective measures being used to prevent or reduce exposure to dusts e.g. wood, cement, silica?

  • Are suitable protective measures being used to prevent or reduce exposure to noise and vibration?

  • Is work equipment, plant and machinery maintained in a safe condition and is it inspected regularly by competent persons?

  • Are plant and machinery safety devices kept in good working order e.g. sound signals, guards?

  • Are excavations adequately supported to reduce the risk of collapse and are they inspected before work starts and given a thorough examination by a competent person weekly and after alterations?

  • Are people working on site in possession of a valid Safe Pass card and have they been inducted?

  • Are workers suitably trained and in possession of a valid CSCS card where applicable?

  • Do all employees get information about potential risks and control measures in a language and at a level that they understand?

  • Are there systems in place for consultation with workers on safety, health and welfare matters and to support the safety representative?

Completion

  • Name

  • Signature

  • inspections complete?

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.