Title Page

  • Site Name

  • Conducted on

  • Prepared by

  • Location

Matrice 350 RTK with Zenmuse L2 Sensor Preflight Check (At Office)

  • Batteries Charged for Controller and Drone?

  • SD Card Installed into Payload Camera?

  • Mission Planned on Controller?

  • Boundary to be planned on site?

  • Drone Transport Case and Camera Transport Case have all required equipment for flight?

  • Checked DJI Unlock Map Prior to Flight?

  • Will you need to unlock a zone?

  • Airspace Class?

  • Aeropoints in Bag and Ready for Flight?

On-Site Weather

  • Was weather forecast checked today prior to arriving on-site?

  • Are conditions as forecast?

  • Visual Conditions on Site:

  • Remember to Adjust Shutter Priority on Camera to 1/800

  • Wind Speed(Max Wind not to Exceed 20mph)

  • Visibility greater than 3 miles?

  • Precipitation?

Drone Unpacking

  • Landing Gear Removed from Box and Inserted and Fastened to Bottom of Drone

  • Payload Gear Checked for Damage?

  • Gimbal Protector Removed?

  • Placed on Landing Gear and Arms Locked?

  • Arms Fastened? White Dots Should be Touching and See NO RED

  • Propellers Unfolded and Checked for Damage?

  • Batteries Loaded and Fastened?

  • Transport Case Closed and Set Aside?

Payload Attachment

  • Gimbal Protector on Drone Removed?(Remember to Press Release While Turning)

  • Gimbal Protector on Camera Removed?

  • Attached Camera(Fastened to Gimbal Payload Gear w/Red Dots Lined Up?)

  • Camera Lens Protector Removed?

Mission Flight Settings

  • Correct Mission Selected?

  • Controller Antenna Flipped Upwards from Back of Controller?

  • Payload Camera Set to Zenmuse L1/L2 - LiDAR?

  • Mission Flight Route Altitude Set to <200 Feet?

Advanced Settings

  • Course Angle of Flight Optimized?

  • Margins Set to "0"

  • Photo Mode Set to "DISTANCE INTERVAL" - DO NOT SET TO "TIMED"

Preflight Takeoff

  • Aeropoints Set w/Clear View of Sky and Turned On?

  • Aeropoints Shot w/Rover for Localization?

  • Takeoff Area Clear of Obstacles?

  • License and Registration on Hand?

  • If LAANC Used for Authorization, Do You Have Confirmation?

Post Flight

  • All Equipment Checked for Damage?

  • Camera Removed and Placed Back in Case w/Lens Cover and Gimbal Cover?

  • Drone Arms Collapsed and Drone Placed Back into Case w/Propeller Protectors?

  • Batteries Removed?(DO NOT LEAVE HOT BATTERIES IN DRONE POST-FLIGHT)

  • Landing Gear Removed and Placed in Case?

  • Boxes Closed and Placed Back into Vehicle?

  • Aeropoints TURNED OFF and Collected?

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.