EIFS Quality Inspection Conformance Checklist Phase 2

• Job#316774

• Location/Floor/Elevation

• Conducted on

  Date

• Prepared by

• Add signature

  Sign
• Location
  Address

AquaFlash windows and Expansion Joints

• Ensure AquaFlash is applied at jamb flanges and head of window after window installation.<br>

  Yes

  No

  N/A

• Ensure there is a closed-cell backer rod installed in each expansion joint prior to AquaFlash.

  Yes

  No

  N/A

• Confirm Aquamesh overlaps the expansion joint a minimum of 2" on each side and is completely embedded into substrate with AquaFlash.

  Yes

  No

  N/A

Drainage Strip

• Has the drainage strip been installed at the heads of penetrations, base of wall, and at specified expansion/control joints?

  Yes

  No

  N/A

• Confirm the Drainage Strip is installed by applying dabs of AP Adhesive at 12" on center and ensure firm contact between the adhesive and the wall.

  Yes

  No

  N/A

Backstop NT-Texture

• Verify Dryvit Grid Tape is applied at all sheathing joints, inside and outside corners, and exposed edges not treated with AquaFlash or Flashing Tape.

  Yes

  No

  N/A

• Verify only enough Grid Tape as can be covered with Backstop NT-Texture in a day is applied.

  Yes

  No

  N/A

• Confirm a continuous film of Backstop NT- Texture is applied and fully embedded in Grid Tape

  Yes

  No

  N/A