EIFS Quality Inspection Conformance Checklist Phase 4

• Job #316774

• Great Wolf

• Location/Floor/Elevation

• Conducted on

  Date

• Q.C. Prepared by

• Add signature

  Sign
• Add location
  Address

Finish Coat Installation & Inspection

• Confirm air and surface temperature to be 40 degrees or higher and must remain so for a minimum of 24 hours.

  Yes

  No

  N/A

• Have all irregularities and/or efflorescence in the base coat been corrected?

  Yes

  No

  N/A

• Confirm necessary primers/ sealers are applied properly.

  Yes

  No

  N/A

• Ensure finish will be installed continuously to a natural break.

  Yes

  No

  N/A

• Ensure work is done on the cool side of the building or use shade cloth. Verify that each mechanic uses the same tool and hand motion as the next.

  Yes

  No

  N/A

Caulking

• Verify that no finish material is applied in sealant joints.

  Yes

  No

  N/A

• Are all the caulk joints 3/4"(unless specified otherwise) and within tolerance?

  Yes

  No

  N/A