Electrical Audit

Are Electrical Leads adequately protected and in good condition?<br><br>Examples - Are nicks, cuts, repairs or signs of perishing evident<br>Are leads protected from mechanical damage? E.g. Crushing or sharp edges.<br><br>If yes, stop work until the lead is repaired by an electrician or replaced.

Are there too many plugs fed from one socket outlet<br><br>If yes this presents a fire hazard. Stop work until an approved multibox is available.

Are domestic extension leads or multipoint adapters being used?<br><br>No domestic rated extension leads or multipoint adapters to be used<br>

Do Electrical Leads have a current Inspection Tag?<br><br>If no, stop work until lead with current test tag is in use.<br>

Are Electrical leads fully unwound from the storage reel?<br><br>If no, this presents a fire hazard. Stop work until leads completely unwound.<br>Inspect lead for heat damage before use.<br>

Are there exposed wires or cores where the outer sheath has been pulled back?<br><br>If yes, stop work until the lead is repaired by an Electrician or replaced.<br>

Are Electrical portable tools protected by a Residual Current Device (RCD)?<br><br>If no, stop work until RCD is in use.<br>

Ask Electricians if they have practiced "Test Before You Touch".<br><br>If no, counsel the Electrician on the use of "Test Before You Touch" and make sure this is carried out before work restarts.<br>

Ask Electricians to see their Multimeter.<br>

Is the Multimeter in good condition?<br><br>Leads and probes sound with no cracks or tape repairs.<br>Case sound with no cracks or loose plugs.<br>Is there a calibration or test certificate?<br>