Title Page

  • Document No.

  • Audit Title

  • Client / Site

  • Conducted on

  • Prepared by

  • Location
  • Personnel

  • Add location
  • Select date

  • What installation is required and what is it to be used for

  • Exact location of installation <br>Please describe and<br>Add photo or diagram

  • Add diagram of location if required

  • Where is the supply to be fed from give Board designation and location (Proposed Distribution Board)<br>And photo of board showing spare ways

  • Note proposed circuit designation (Circuit in DB) to be used <br>note circuits not to be doubled up on existing supplies in distribution board

  • Where is the proposed Distribution board fed from.<br>And what type and size of over load protection is there for this board<br>Please add in notes and a photo of board and of over load protection

  • Size of over load protection required for new power supply including make and reference of Over load (Mcb or Fuse) please answer following questions<br>Make , rating , type and reference number required<br>Add photo of existing mcd or fuse

  • Is RCD protection required<br>If yes will it fit in the board or will a sub board be required

  • If a sub board is required what material will be needed including containment to couple board to MCB location <br>Ie Flexible conduit, conduit , conduit accessories,Trunking, Cable & glands,couplings and bushes<br>Add photo of proposed location

  • Cable for the new installation please answer these question<br>What cable type <br>What cable size<br>How many cores

  • What is the proposed cable route <br>Please add full description and photos if required

  • What cable length is required

  • What type of cable containment is required to be installed to route this cable <br>Please note below types and quantities<br>Eg , Clips, Cleats, Trunking, Conduit, Saddles, Tie wraps, Cable tray

  • What electrical accessories are required for the new supply<br>Note size and type <br>Ie sockets,isolators,Fused Connection units etc

  • List any other materials required in this section if not listed above

  • Number of men required and estimated time for installation<br>Please note if job needs to be done out of hours or normal hours please advise of any other working restrictions may apply

  • What type of access equipment will be required and approximate working height <br>Ie, Step ladders, Scaffold , cherry picker etc<br>Please note ground type if applicable <br>Note any access restrictions or relevant information please add a photo<br>

  • Add notes for any further information required

  • Email survey when saved to office service@jacelectrical.co.uk

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.