EV installation works Inspection 2.0 - Search

• WO

• Who carried out this installation:

• Conducted on

  Date

• Prepared by

Cabling and containment

• Are cables and/or containment correctly supported?

  Yes

  No

  N/A

• Is containment installed to a satisfactory standard?

  Yes

  No

  N/A

• Have cable holes been seal to maintain fire safety of the building?

  Yes

  No

  N/A

Distribution board

• Was new DB EV installed?

  New DB

  No new DB

• DB EV supplied from:

  Existing DB

  Henley block

• Circuit protective device (type and rating)

• Picture of circuit protective device's connections (existing DB)

  Media

• Picture of Henley blocks's connections

  Media

• Cable used to supply DB EV:

  NYY-J

  PVC/PVC

  SWA

  Other

• Please specify cable used:

• Live conductor size (mm²)

• CPC size (mm²)

• Is circuit protective device suitable for cable used?

  Yes

  No

• Is IP rating of DB EV correct? (Cable entries, metal blanks present)

  Yes

  No

• Is mechanical protection for cable entries present?

  Yes

  No

• Are all labels and warning notices present?

  Yes

  No

• Circus protective device supplying EV charger (type and rating)

• Picture of DNO/henley blocks/ CT clamp/seals

  Media

• Were seals installed to DNO fuse and meter?

  Yes

  No

  N/A

• Was a CT clamp installed on the correct tail, correct polarity and secured?

  Yes

  No

  N/A

• Is circuit protective device correct for the cable used?

  Select Yes No

  • Yes
  • No

• Observations

EV charger

• Picture of internal connections

  Media

Testing

• Zs (Ohms)

• RCD disconnection time (ms)

• Are test results compliant?

  Yes

  No

Summary

• Is cabling compliant to BS7671?

  Select Yes No

  • Yes
  • No

• Was the engineer using the correct PPE (including for the temporary removal of DNO fuse, etc)?

  Yes

  No

• Did the engineer follow correct procedures (safe isolation, temporary removal of DNO fuse, etc.)?

  Yes

  No

• Was the engineer wearing arc resistant uniform?

  Yes

  No

• Was the engineer using a torque screwdriver?

  Yes

  No

• Were all connections tightened to the correct torque?

  Yes

  No

• Any remedial action needed?

  Urgent

  Planned

  N/A

• Comments on the installation

• Score

  Excellent

  Very good

  Meets minimal requirements

  Minor deviations

  Poor or non-compliant

• Signature

  Sign