Information
-
WTG # and Exhibit:
-
Conducted on
-
Prepared by
-
Project Name: Baffin Wind
-
Project Number: 13140009
-
Date / Time:
-
Photos:
-
Inside to inside diameter of the ring is 12' 11 7/8" diameter. Verify in 6 locations.
-
Outside to outside dimension of the ring is 14' 9 3/16" diameter. Verify in 6 locations.
-
Inner to outer width of embed ring is within 10 5/8" +/- 1/8"
-
Center to center dimension of interior holes is 13' 4 11/16" diameter. Verify in 6 locations.
-
Center to center dimension of exterior holes is 14' 4 3/8" diameter. Verify in 6 locations.
-
Tolerance of +/- 1/16" center to center for hole dimensions. Measured from both sides of welded seams to assure flush points.
-
Outside edge of ring to edge of outer bolt hole is 1 9/16". Verify in 6 locations.
-
Inner edge ring to edge of inner bolt hole is 1 17/32". Verify in 6 locations.
-
Tolerance of +/- 1/16" center to center for hole dimensions. Measured from both sides of welded seams to assure flush points.
-
Bolt holes are 1 3/4" diameter. Verify 20% random holes.
-
Bolt holes are cut/drilled straight through the steel, not skewed.
-
Verify ring is welded correctly and that welds are ground flat if near holes.
-
Materials are received with no NCN's.
-
If no, are issues closed?
- Yes
- No
-
Mortenson QA/QC Representative:
