Title Page
-
Conducted on
-
Prepared by
-
Location
-
Equipment type
-
Equipment Serial Number
-
Please, Provide picture of the equipment
Inspection Checklist.
-
what equipment are you inspecting?
-
1. Hardware: (Includes D-rings, buckles, keepers, and back pads) Inspect for damage, distortion, sharp edges, burrs, cracks and corrosion.
-
Communicate with your supervisor/manager. Remove from Service - Send to Manufacturer for Inspection/Servicing
-
2. Webbing: Inspect for cuts, burns, tears, abrasion, frays, excessive soiling and discoloration.
-
Communicate with your supervisor/manager. Remove from Service - Send to Manufacturer for Inspection/Servicing
-
3. Stitching: Inspect for pulled or cut stitches.
-
Communicate with your supervisor/manager. Remove from Service - Send to Manufacturer for Inspection/Servicing
-
4. Labels: Inspect, make certain all labels are securely held in place and legible. (attach picture of the label)
-
Communicate with your supervisor/manager. Remove from Service - Send to Manufacturer for Inspection/Servicing
-
1. Hardware: (Includes snap hooks, carabiners, adjusters, keepers, thimbles and D-rings). Inspect for damage, distortion, sharp edges, burrs, cracks, corrosion and proper operation.
-
Communicate with your supervisor/manager. Remove from Service - Send to Manufacturer for Inspection/Servicing
-
2. Webbing: Inspect for cuts, burns, tears, abrasion, frays, excessive soiling and discoloration.
-
Communicate with your supervisor/manager. Remove from Service - Send to Manufacturer for Inspection/Servicing
-
3. Stitching: Inspect for pulled or cut stitches.
-
Communicate with your supervisor/manager. Remove from Service - Send to Manufacturer for Inspection/Servicing
-
4. Synthetic Rope: Inspect for pulled or cut yarns, burns, abrasion, knots, excessive soiling and discoloration.
-
Communicate with your supervisor/manager. Remove from Service - Send to Manufacturer for Inspection/Servicing
-
5. Wire Rope: Inspect for broken wires, corrosion, kinks and separation of strands.
-
Communicate with your supervisor/manager. Remove from Service - Send to Manufacturer for Inspection/Servicing
-
6. Energy Absorbing Component: Inspect for elongation, tears and excessive soiling.
-
Communicate with your supervisor/manager. Remove from Service - Send to Manufacturer for Inspection/Servicing
-
7. Labels: Inspect, make certain all labels are securely held in place and legible. (attach picture of the label)
-
Communicate with your supervisor/manager. Remove from Service - Send to Manufacturer for Inspection/Servicing
-
1. Hardware: (Includes snap hooks, carabiners, adjusters, keepers, thimbles and D-rings). Inspect for damage, distortion, sharp edges, burrs, cracks, corrosion and proper operation.
-
Communicate with your supervisor/manager. Remove from Service - Send to Manufacturer for Inspection/Servicing
-
2. Webbing: Inspect for cuts, burns, tears, abrasion, frays, excessive soiling and discoloration.
-
Communicate with your supervisor/manager. Remove from Service - Send to Manufacturer for Inspection/Servicing
-
3. Stitching: Inspect for pulled or cut stitches.
-
Communicate with your supervisor/manager. Remove from Service - Send to Manufacturer for Inspection/Servicing
-
4. Synthetic Rope: Inspect for pulled or cut yarns, burns, abrasion, knots, excessive soiling and discoloration.
-
Communicate with your supervisor/manager. Remove from Service - Send to Manufacturer for Inspection/Servicing
-
5. Wire Rope: Inspect for broken wires, corrosion, kinks and separation of strands.
-
Communicate with your supervisor/manager. Remove from Service - Send to Manufacturer for Inspection/Servicing
-
6. Energy Absorbing Component: Inspect for elongation, tears and excessive soiling.
-
Communicate with your supervisor/manager. Remove from Service - Send to Manufacturer for Inspection/Servicing
-
7. Labels: Inspect, make certain all labels are securely held in place and legible. (attach picture of the label)
-
Communicate with your supervisor/manager. Remove from Service - Send to Manufacturer for Inspection/Servicing
Hooks/Carabiners use with the equipment
-
1. Physical Damage: Inspect for cracks, sharp edges, burrs, deformities and locking operation.
-
Communicate with your supervisor/manager. Remove from Service - Send to Manufacturer for Inspection/Servicing
-
2. Excessive Corrosion: Inspect for corrosion which effects the operation and/or strength.
-
Communicate with your supervisor/manager. Remove from Service - Send to Manufacturer for Inspection/Servicing
-
3. Markings: Inspect, make sure certain marking(s) are legible.
-
Communicate with your supervisor/manager. Remove from Service - Send to Manufacturer for Inspection/Servicing