Title Page
-
Employee Name
-
Trained By
-
Conducted on
Every home is provided with a site specific Roof Railing Plan indicating the total number of components needed for the project and the installation location of each component.
-
Does Employee demonstrate understanding of Roof Railing Plan
All system components must be inspected prior to being used, every time before each use.
-
Stacker Brackets, Clamps, Posts, and End Gates must inspected for any damage including but not limited to broken welds, bent components, or stripped threads.
-
Does employee inspect all system components prior to installation.
-
Planks must be inspected for splits, delamination, saw kerfs, notches, holes, face breaks, etc.
-
Employee inspects plank prior to usage?
After inspecting all required system components we can begin to assemble them.
-
Stacker brackets must assembled with a 36 inch support brace even at sheer wall locations
-
Employee correctly assembles Stacker Bracket?
-
Install Stacker Bracket at the predesignated spot from the Roof Railing Plan
-
Employee safely hangs completed Support Bracket?
-
Install Guardrail Posts, Scaffold Planks and Guardrails. First Set of Posts, Planks and Guardrails must be installed from a secured ladder.
-
Employee safely installs Guardrail Posts?
-
Employee safely installs scaffold planks?
-
Employee safely installs guardrails?
-
Install End Rails at all system run termination points.
-
Employee safely installs End Rails?
-
With full hip roofs, brackets are placed all the way around the top plate with corners connected on a 45. End rails are not necessary on hip roof.
-
Employee safely installs plank at hip corners?
Prior to Disassembly: Ensure all necessary carpentry is complete
-
Remove rails, uprights, and planks while working in reverse direction of installation. Stack material on roof jacks, or lower to the ground.
-
Employee safely removes system components?
-
Remove Stacker Bracket from wall by loosing clamp from stacker bracket.
-
Employee safely removes Bracket System at sheer wall?
-
Employee safely removes Bracket System at non sheer wall locations?
-
Clean up is vital! Ensure all system components are returned to their proper storage box.
-
Employee picks up and properly stores all system components ?
-
Take a picture of Employee with hard hat sticker
-
Employee signature
-
Trainer signature
-
Training information provided in Spanish translation. Initial
