Title Page
-
Conducted on
-
Prepared by
-
Location
Door Leaf
-
Does the door leaf sit against the door stop and is it free from distortion?
-
If the door is veneered or lipped is this firmly glued?
-
Is the door free from damage, dents and holes?
Door Frame
-
Is the door frame firmly attached to the wall?
-
If a door stop is present is it firmly attached?
-
Is the frame to door gap less than 4mm?
Door Seals
-
Are intumescent seals in place (cold smoke seal and flat intumescent strip)?
-
Are the seals well attached in the door or frame?
-
Are the seals continuous?
-
Are the seals free of damage?
-
Are brush seals free of paint and fin seals in good repair?
Hinges
-
Are there a minimum of three hinges with all screws fitted?
-
Are the hinges free of damage and packing?
Door Closers
-
Does the door close fully when opened to 75mm?
-
Is the closer securely fixed to frame and door?
-
Is the closer free from damage and leaks?
-
If hung in pairs do they close in line?
Hold open devices
-
Does any electronic hold open device release when the alarm sounds?
Lock and Latch
-
Does the latch hold the door firmly in place without rattles?
Glazing and Glass
-
Is the seal around any glazing continuous?
-
Are any glazing beads well attached to the frame and free of damage?
-
Is the glazing free of damage and cracks?
-
Is the glass fire rated (check for a pyroguard stamp)?
-
Is there a consistent gap under the door that allows it to swing without touching the floor?
Threshold gap
-
Is the floor to floor gap 10mm or less?
-
If drop down seals are fitted, are these secured firmly to the door?
Final Exit Fire Doors
-
Do door release systems immediately open the door?
-
If thumb screw turns are fitted, is signage showing way to turn clearly displayed?
-
Do doors open without any obstructions?
-
If break glass bolts are fitted, are these tested periodically for opening and hammers are secured on a chain?
Summary of Actions
Failed Items
Sign off
-
Name of person completing check