Forklift Operator Daily Checklist

This Forklift Operator Daily Checklist can be used prior to daily forklift usage. This forklift inspection checklist is divided into 2 parts: before starting the engine and after starting the engine to check if all controls are functioning correctly. If any parts are found to be damaged or malfunctioning, the equipment should be tagged out and reported to the manager. Use SafetyCulture on mobile devices to take photos of malfunctioning parts and use SafetyCulture’s scheduling feature to assign and complete regular inspections.

Title Page

FPAG Victor Harbor
Prepared By
Conducted on

Daily Checklist

Before starting the engine
Check all fluid levels (Monday weekly)
Check tyres and rims for wear or damage and correct inflation
Wheel nuts present & tight
Check for oil/fuel leaks or any loose items or obvious damage / cracks
Check hydraulics hose, unions and cylinders for leaks or damage
Mirrors adjusted, clean and in good order
Is the LPG Gas cylinder secure with no leaks (where fitted)
After starting the engine
Check engine for any unusual noises
Check reversing beeper and hazard lights are operational
Check the operation of the park/ foot brake and inching pedal
Check the operation of the horn, lights & indicators
Check the operation of steering mechanism and transmission (forward/reverse)
Check operation of hydraulic controls (lift, tilt and reach work properly for their full extent)
General operation review
Is the seat in good condition?
Is seatbelt present, in good condition and functioning?
Is overhead visibility obstructed
Check tines/forks and locking pins are in place and damage free