Forklift Operator Pre-Use Inspection

Information

Forklift Vehicle Identification Number
Hour Meter Reading
Make/Model#
Job Site
Conducted on
Prepared by
Location

Forklift Inspection

General: Good condition with no damage, excessive dirt or rust
Forks: Correctly positioned, not damaged, cracked, bent or worn.
Carriage Plate: No damage or distortion,sitting square to the mast and lubricated.
Mast/Boom: No damage, distortion or cracks. No undue wear, scoring, dirt, or foreign bodies in channels. Rollers, no uneven wear<br>or incorrect tracking. Slides intact and secure.
Back Rest Extension / Load Guard: In good condition, secure with no distortion or cracks.
Lift Chains: Not damaged worn or stretched, no broken links or rust. All pins in place.
Tires: No damage, excessive dirt or wear, rust,cracks, splits or separation of tires and rims.
Wheels: Undamaged and free from obstruction and debris. All nuts secure and in place.
Overhead Guard / Roll Over Protection Frame: Secure,undamaged with no loose items.
Energy Source:<br>• Gas or Diesel: Engine oil, fuel, and radiator water level correct.<br>• Electric: Electrolyte level, battery plug and connections correct. Power cable intact, connected and secure. No exposed wires,<br>battery brackets secure and battery adequately charged.
Hydraulics: No damage or fluid level/leaks, no splits in hoses, no leaks around fittings.
Operator’s Compartment: Clean with no loose items.
Access: Steps and grab handles in good condition and clean.
Lights, Windscreen and Mirrors (if fitted): Clean and undamaged.
Fire Extinguisher: Secure and charged.
Seatbelt: Accessible, in good condition and working correctly.
Ignition & Electrical System: Working correctly.All gauges and instruments visible and working.
Back up Alarm and Horn: Working correctly and audible.
Warning Lights & Lights (if fitted): Working correctly.
Hydraulic Controls: Working smoothly and correctly.
Brakes (Foot & Parking): Working correctly.
Exhaust: No excessive smoke,sparks or flames.