Title Page

  • Site conducted

  • Conducted on

  • Prepared by

  • Location
  • Inspect Fume Hood For:<br>Clear of materials<br>Hazardous Waste Bottle Labeled Properly

  • Select Cabinets To Inspect:

  • Please Inspect Cabinets in Main Laboratory For:<br> Expired Material<br> Secondary Containment<br> Properly Labeled

  • Sharps containers available for disposal of pipette tips and other sharps

  • Inspect Fire Extinguishers For:<br>Serviced monthly (Every month starting February)

  • Select Refrigerator (s) To Inspect:

  • Please Inspect Refrigerator For:<br>Excess base / Stock solution From Products Already Filled/Completed <br>Product Tanks/Carts Properly Labeled<br>Product Spills On Floor

  • Inspect wash pits for proper storage of equipment and solutions:<br>Stainless steel/Plastic equipment have been properly rinsed and if not in use are properly stored <br>Cleaning solutions are stored in proper tanks <br>NOTE: If Serum is thawing in the wash pit please contact lead Chemist and/or Supervisor for status

  • Inspect -20 Freezer (Formulation Side) For: Aisle Accessible; Organized

  • Inspect Minimum 10 Pieces Of Equipment For Within Service / Calibration Date. Take An image Of Each Calibration Label.

  • Inspect Argon Tanks For:<br>Safety pin in place; Gauges read zero; knobs closed; Empty containers Removed from Floor <br>Disconnect tubing from tank if liquid/dried product in tubing

  • Select pH Meter To Inspect

  • Inspect pH Meter Carts For:<br>Daily Verification Performed<br>Standards Not Expired<br>Dilute Acid/Base Solutions Not Expired<br>Take an image of the individual log books and pH Standards for each pH meter

  • Inspect Biohazard Cans For: <br>Proper Labeling<br>Lids On Cans Except When In Use<br>

  • Inspect Areas Designated With Tape For:<br>Area's outlined with tape in good condition (floor, cabinets, drawers, Shower stations, Refrigerated Safety Zones, etc)

  • Inspect Emergency Showers For:<br>Accessible (not blocked)

  • Inspect Safety Spill Kit For:<br>Stocked and Organized

  • Please Inspect Diabetes Processing Area <br>Inspect centrifuges and verify buckets and internals are clean (eg: no blood, serum, etc) Stainless steel/Plastic equipment have been properly rinsed and if not in use are properly stored <br>Inspect Minimum 5 Pieces Of Equipment For Within Service / Calibration Date. Take An image Of Each Calibration Label.

  • Please Inspect Hematology Lab (Non-CEA) For: 2-8 Gray Storage Racking Organized and Contains No Expired Materials <br>Flammable Cabinet Organized and Containers Properly Labeled <br>Inspect Minimum 5 Pieces Of Equipment For Within Service / Calibration Date. <br>Take An image Of Each Calibration Label. <br>

  • Inspect Hazardous Material Storage Area (Located Near Bosch 2) Verify ONLY contains containers used for disposal of Hazardous Materials Take an image of the area

  • Performed By:

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.