Information

  • Document No.

  • Conducted on

Internal and final fire exit door check

  • Does the internal DM office door close correctly, is the gap around and between it about the width of a pound coin edge, are there any holes in it and are the intumescent strips in place and in good condition?

  • Does the internal managers door close correctly, is the gap around and between it about the width of a pound coin edge, are there any holes in it and are the intumescent strips in place and in good condition?

  • Does the internal staff room door close correctly, is the gap around and between it about the width of a pound coin edge, are there any holes in it and are the intumescent strips in place and in good condition?

  • Does the internal wet change entrance door close correctly, is the gap around and between it about the width of a pound coin edge, are there any holes in it and are the intumescent strips in place and in good condition?

  • Using the push bar, does the shallow end pool external door open correctly, is the gap around and between it about the width of a pound coin edge, are there any holes in it and are the intumescent strips in place and in good condition?

  • Does the internal pool to plant room door close correctly, is the gap around and between it about the width of a pound coin edge, are there any holes in it and are the intumescent strips in place and in good condition?

  • Using the push bar, does the pool plant room external door open correctly, is the gap around and between it about the width of a pound coin edge, are there any holes in it and are the intumescent strips in place and in good condition?

  • Does the internal pool plant to stair 1st door close correctly, is the gap around and between it about the width of a pound coin edge, are there any holes in it and are the intumescent strips in place and in good condition?

  • Does the internal pool plant to stair 2nd door close correctly, is the gap around and between it about the width of a pound coin edge, are there any holes in it and are the intumescent strips in place and in good condition?

  • Using the push bar, does the pool plant stairway external door open correctly, is the gap around and between it about the width of a pound coin edge, are there any holes in it and are the intumescent strips in place and in good condition?

  • Does the internal stairway to pool change 1st door close correctly, is the gap around and between it about the width of a pound coin edge, are there any holes in it and are the intumescent strips in place and in good condition?

  • Does the internal stairway to pool change 2nd door close correctly, is the gap around and between it about the width of a pound coin edge, are there any holes in it and are the intumescent strips in place and in good condition?

  • Does the internal stairway to main gym close correctly, is the gap around and between it about the width of a pound coin edge, are there any holes in it and are the intumescent strips in place and in good condition?

  • Does the internal main gym entrance/exit door close correctly, is the gap around and between it about the width of a pound coin edge, are there any holes in it and are the intumescent strips in place and in good condition?

  • Using the push bar, does the deep end pool external door open correctly, is the gap around and between it about the width of a pound coin edge, are there any holes in it and are the intumescent strips in place and in good condition?

  • Does the internal upper landing to staff room corridor door close correctly, is the gap around and between it about the width of a pound coin edge, are there any holes in it and are the intumescent strips in place and in good condition?

  • Does the internal staff room corridor to fire stairs door close correctly, is the gap around and between it about the width of a pound coin edge, are there any holes in it and are the intumescent strips in place and in good condition?

  • Does the internal staff room corridor to Base door close correctly, is the gap around and between it about the width of a pound coin edge, are there any holes in it and are the intumescent strips in place and in good condition?

  • Does the internal Base to upper landing door close correctly, is the gap around and between it about the width of a pound coin edge, are there any holes in it and are the intumescent strips in place and in good condition?

  • Does the internal upper landing to toilets corridor door close correctly, is the gap around and between it about the width of a pound coin edge, are there any holes in it and are the intumescent strips in place and in good condition?

  • Does the internal old bar store door close correctly, is the gap around and between it about the width of a pound coin edge, are there any holes in it and are the intumescent strips in place and in good condition?

  • Does the internal manikin store door close correctly, is the gap around and between it about the width of a pound coin edge, are there any holes in it and are the intumescent strips in place and in good condition?

  • Does the internal corridor to studio 2 door close correctly, is the gap around and between it about the width of a pound coin edge, are there any holes in it and are the intumescent strips in place and in good condition?

  • Does the internal Base plant room door close correctly, is the gap around and between it about the width of a pound coin edge, are there any holes in it and are the intumescent strips in place and in good condition?

  • Does the internal Base/Cafe store door close correctly, is the gap around and between it about the width of a pound coin edge, are there any holes in it and are the intumescent strips in place and in good condition?

  • Does the internal Base office store door close correctly, is the gap around and between it about the width of a pound coin edge, are there any holes in it and are the intumescent strips in place and in good condition?

  • Does the internal Base to exit stairs door close correctly, is the gap around and between it about the width of a pound coin edge, are there any holes in it and are the intumescent strips in place and in good condition?

  • Does the internal Base to exit stairs door close correctly, is the gap around and between it about the width of a pound coin edge, are there any holes in it and are the intumescent strips in place and in good condition?

  • Using the push bar, does the Fives main exit external door open correctly, is the gap around and between it about the width of a pound coin edge, are there any holes in it and are the intumescent strips in place and in good condition?

  • Using the push bar, does the Fives side exit external door open correctly, is the gap around and between it about the width of a pound coin edge, are there any holes in it and are the intumescent strips in place and in good condition?

  • Using the push bar, does the main hall A exit external door open correctly, is the gap around and between it about the width of a pound coin edge, are there any holes in it and are the intumescent strips in place and in good condition?

  • Using the push bar, does the skip exit external door open correctly, is the gap around and between it about the width of a pound coin edge, are there any holes in it and are the intumescent strips in place and in good condition?

  • With the doors switched off, can the front entrance doors be pushed open?

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.