Title Page
-
Site:
-
Inspection Area:
-
Conducted on:
-
Carried out by GS:
-
CBRE Attendee(s):
-
Document Reference No.:
STATUS OF PREVIOUS ACTIONS
-
Is there any overdue action from previous inspections?
-
Why are there overdue actions?
-
ESCALATE TO ENSURE OVERDUE ACTIONS ARE COMPLETED
OHS Inspection Sections
1). General Safety Conditions
-
1.1 - Is the area free of hazards that could cause injury or harm?
-
DON`T FORGET TO DESCRIBE THE HAZARD (incl. photos)
-
1.2 - Are fire exits marked, unobstructed and in sound condition?
-
1.3 - Are electrical cords/cables & outlets in a satisfactory & safe condition?
-
1.4 - Are machines and/or equipment appropriately guarded?
-
1.5 - Is the area free of liquid spills or trip hazards?
-
1.6 - Are general aisles and walkways clear and unobstructed?
-
1.7 - Are escape routes/exits clearly marked, illuminated, clear and free of obstructions?
-
1.8 - Are ladders, scaffolds and harnesses in a satisfactory condition and routinely inspected?
-
1.9 - Is safety signage suitable & sufficient, and appropriately displayed?
2). HEALTH & HYGIENE
Health & Hygiene
-
2.1 - Are all working areas clean, neat and tidy, and the general housekeeping standards are of suitable & acceptable standard?
-
2.2 - Are waste bins emptied appropriately? (if the bin is overflowing = fail)
-
2.3 - Are storage areas clean and well-maintained?
2.4 - PPE
-
2.4.1 - Has suitable and sufficient PPE been issued to staff, as required?
-
2.4.2 - Has PPE been inspected and free from defects / in good condition?
2.5 - First Aid & Eyewash station
-
2.5.1 - Is the First Aid kit fully equipped and checked?
-
2.5.2 - Is the emergency eyewash station in place and 'use by' date correct?
3). OPERATIONAL ASPECTS
Operational Aspects
-
3.1 - Are machines and equipment functioning properly?
-
3.2 - Are safety mechanisms and warning systems operational and performing as intended?
-
3.3 - Are stores & materials stored and stacked so they are not likely to fall or cause injury? In addition, racking should be of adequate strength and stability.
3.4 - Fork Trucks, Mobile Elevating Platforms (MEWP) & Pallet Trucks
-
3.4.1 - Are fork trucks, mobile elevating work platforms (MEWPs), and pallet trucks in good condition?
-
3.4.1 - Are fork trucks, mobile elevating work platforms (MEWPs), and pallet trucks subjected to periodic examination and inspection?
-
3.5 - Are flammable materials & hazardous substances labelled and stored correctly?
-
3.6 - Is the workplace appropriately secure? i.e. Unauthorized person can´t access the area
4). INSTALLATION DEFECTS
Installation Defects
-
4.1 - Are there visible defects in the building structure or equipment installation that pose a hazard to workers or visitors?
4.2 - Lighting
-
4.2.1 - Are the lights operational?
-
4.2 - Is suitable and sufficient lighting provided at the places where the equipment is used, taking account of the operations to be carried out?
-
4.3 - Are firefighting appliances (portable fire extinguishers and/or hose reels) in place, within service, and appropriately identified and mounted?
-
4.4 - Are the HVAC assets, services, and systems in a satisfactory condition? (Free from excessive vibration, heat, noise & leaks)?
-
4.5 - Is there safe access/egress provided and maintained, in particular for assets requiring maintenance? i.e. Asset can´t be accessed due to its location
5). GENERAL COMMENTS
GENERAL COMMENTS:
-
Any further comments or recommendations arising from this inspection?
-
Any additional relevant photos?
CHECK OUT
-
Global Switch - Name and Surname:
-
Position of person doing inspection:
-
Global Switch Signature: