Hand & Power Tools Safety Checklist

• Tool Safety Checklist

• Document No.

• Client / Site

• Conducted on

  Date

• Prepared by

• Location
  Address

• Personnel

A. General Requirements for Hand and Power Tools

• 1. Tools are kept in good condition with regular maintenance

  Yes

  No

  N/A

• 2. Tools are used according to the proper function and purpose

  Yes

  No

  N/A

• 3. Tools are examined for damage before use

  Yes

  No

  N/A

• 4. Appropriate personal protective equipment (PPE) is available and in use as necessary

  Yes

  No

  N/A

• 5. Damaged or unsafe tools are taken out of service

  Yes

  No

  N/A

• 6. Employees have been properly trained on the uses and limitations of each tool

  Yes

  No

  N/A

B. Electric Powered Tools

• 1. Tools have a three-wire cord with a ground or double insulated.

  Yes

  No

  N/A

• 2. Cords are in good condition without frays or deterioration

  Yes

  No

  N/A

• 3. Tools are not hoisted or lowered by cords

  Yes

  No

  N/A

C. Pneumatic Powered Tools

• 1. Air hoses are in good condition, including couplings and fittings

  Yes

  No

  N/A

• 2. Compressed air is not used for cleaning employees or clothing

  Yes

  No

  N/A

• 3. Tools are not hoisted by the air hose

  Yes

  No

  N/A

• 4. Noise measurements have been taken when necessary

  Yes

  No

  N/A

D. Multi-Meter

• 1. Is the meter a class III meter?

  Yes

  No

  N/A

• 2. Assure the calibration is up to date

  Yes

  No

  N/A

• 3. Inspect all tools to ensure they are not altered from their original state no damage to the case, display etc.

  Yes

  No

  N/A

• 4. Ensure all tools are clean and free of grease and dirt. Clean all tools if needed

  Yes

  No

  N/A

• 5. Inspect the condition of the leads

  Yes

  No

  N/A

• 6. Are the connection of the leads to the meter tight

  Yes

  No

  N/A

• 7. Do the tips show any damage or wear

  Yes

  No

  N/A

• 8. Inspect the lead insulation for damage, wear, cuts etc.

  Yes

  No

  N/A

• Remove multi-meter from service if it fails any of the above. If necessary provide an explanation.

E. Hydraulic Powered Tools

• 1. Hydraulic fluids are of an approved type, either fire-resistant or insulating, as needed

  Yes

  No

  N/A

• 2. Manufacturer's recommended safe operating pressure is not exceeded in hoses, valves, pipes, filters or other fittings

  Yes

  No

  N/A

F. Powder-Actuated Tools

• 1. Employees have been properly trained

  Yes

  No

  N/A

• 2. Proper shielding is available

  Yes

  No

  N/A

• 3. Unattended tools are properly secured from authorized use

  Yes

  No

  N/A

• Summary of Findings

• Please sign upon audit completion

  Sign