Intruder Alarm Checklist (PD6662/BS8243)
-
Site conducted
-
Inspection report number
-
Points Total
-
NSI Grade (A-E)
-
Name and Address of Installation
Documentation
Documentation
-
A1 - NSI Certificate
-
A2-A6, A8, A10 - System Design / Record
-
A7 - Equipment Marking
-
A9 - Commissioning and Handover
System Requirements
-
B1 - Mandatory Functions
-
B2 - Grading
-
B3 - Siting of Equipment
-
B4-B5 - HAS installation/Duress
-
B6 - Filtering
-
B7-B12 - IAS sequential information
-
B13-B16 - HAS confirmation
-
B17-B25 - Audio confirmation
-
B26-B28 - Visual confirmation
Tamper Protection
-
C1-C2 - Housing
Tamper & Substitution Detection
-
D1-D3 - Tamper Detection
-
D4-D5 - Substitution Detection
Environmental Precautions
-
E1-E2 - Environmental Requirements
Interconnections
-
F1 - Monitoring & Tamper
-
F2-F8 - Wired Interconnections
Faults
-
G1 - Fault Recognition
-
G2-G3 - Masking & Range Detection
-
G4 - Transmission Path Faults
Operation
-
H1-H3 - General & Access Levels
-
H4-H6 - Restore/Inhibit/Isolate
-
H7-H8 - Test & Other Operations
Setting
-
J1 - Authorisation & Setting
-
J2-J7 - Prevention/Completion of Setting
-
J8-J11 - Setting Indications
-
J12 - Sub-systems
Unsetting
-
J13-J16 - Authorisation, Unsetting & Entry
-
J17-J18 - Unlocking Initial Entry Door
-
J19-J20 - Opening Initial Entry Door
-
J21-J26 - Completion using Digital Key
-
J27 - Unsetting in Conjunction with ARC
-
J28 - Remote Setting and Unsetting
Event Recording
-
K1-K5 - Recording, Transmission Records
Processing & Indication
-
L1-L6 - Processing & Indication
Power Supplies
-
M1-M7 - Power Supplies
Warning Devices
-
N1-N2 - Installation
-
N3-N6 - External & Internal WD's
-
N7-N11 - Self powered WD's
Notification
-
P1-P2 - Notifications & ATS Performance
-
P3-P5 - Audible WD's & Bell Delay
-
P6-P7 - Prime Power Faults & Earthing
Detection Devices - General
-
R1-R2 - General & Power
-
R3 - Range Reduction & Masking
-
R4 - Response Times
-
R5 - Tamper
-
R6 - Detectors with on Board Processing
-
R7 - System Documentation
Detection Devices - Common
-
S1-S6 - Magnetic Contacts
-
S7 - PIR
-
S8 - Combined PIR & Microwave
-
S9-S11 - Glass Break (Acoustic)
-
S12-S13 - Shock
-
S14-S15 - Active Infared Beam
Detection Devices - Uncommon
-
T1 - Microwave
-
T2-T4 - Ultrasonic
-
T5 - Combined PIR & Ultrasonic
-
T6-T10 - Glass Break (Passive & Active)
-
T11 - Active Laser (ALDDR)
-
T13-T16 - Continuous Wire
-
T17-T22 - Foil on Glass
-
T23-T25 - Protective Switches
-
T26-T29 - Acoustic Detectors
-
T30-T31 - Pressure Mats
-
T32-T36 - Beam Interruption Devices
Hold Up Devices
-
U1-U4 - Hold Up Devices
External Key Boxes
-
V1-V3 - External Key Boxes
Security Fog Systems
-
W1-W26 - All Requirements
Closing
-
If part of the installation has not been checked, please give an explanation in the space below.
Untitled Page
-
Engineer Signature
-
Date
-
Auditor Signature
-
Date
-
Location