Title Page
-
Australseal Protective Solutions Pty Ltd - ABN: 68633653362- Address: 37 - 85 Alfred Road Chipping Norton NSW 2170
-
Location:
-
Conducted on:
-
Prepared by:
-
Project Name:
- QN008 - Binah Botany Anglicare
- QN022 - Binah Fairfield Anglicare
- QN025 - Hutchinson Builders Mainsbridge SSP Warwick Farm
- QN042 - Growthbuilt Mt Druitt SAHF2 Anglicare
- QN044 - Brae Group St Peters
- QN063 -Fal Construction Gilroy College
- QN056 - Mainbrace Schofield Town Centre
- QN048 - Piety Beyond Hurstville
- QN065 - ICON East Gateway
- QN029 - Kane Construction Cabramatta Carpark
- QN068 - Adco Batemans Bay Leisure Aquatic Centre
- QN081 - Caringbah Remediation Brae Group
- QN091 - PBS Hedwig Village Blacktown
- QN101 - Carfax Construction - Wenona School (Judith Dey Awning)
- QN155 - Mainbrace - Bankstown Centro
- Other (please ‘add note’ to confirm client):
- Millbrook Homes - 28A Mills Avenue Glenhaven
- Other (please leave a note)
- Builtcom
- Conquest
-
Manufacturer & Material(s) Used:
-
Area(s) Completed (ensure project level and if applicable, reference the location number eg: Level1 - Apartment 101 and area completed):
Activity
Submission origin:
-
E.g: Onsite / Offsite
Activity
-
Substrate inspected and accepted. Substrate must be clean, smooth, dry and free from dust or contaminants. All sharp points and loose materials have been removed
-
Moisture content of substrate checked and accepted and is below acceptable level. (Non invasive procedure). Moisture Content must be below 5% using a Tramex moisture reader
-
Primer applied to relevant and manufacturers standards and application guide as per product data sheet & AS 3740-2021/4654.2:2012
-
Fillet reinforcing vertical & horizontal joints installed at AS standard 12mm cove and as per manufacturers product data sheet
-
Membrane installed to the correct micron thickness and as per manufacturers product data sheet AS 3740-2021/4654.2:2012 (Thickness test to be either conduct by means of a wet film thickness instrument or non-invasive ultrasonic testing).
-
UV Membrane application as per manufacturers recommendation and in accordance with AS 3740-2021/4654.2:2012 (external use only)
-
Allow to cure. Flood test area to identify leaks. Repair as required
-
Efflorescence barrier/Cementitious/Acrylic membrane applied above screed, ensure screed bed has cured for 48 hours prior to application, that it is clean, smooth, dry and free from dust contaminants. Epoxy primer must be applied 8 hours before acrylic membrane application, cementitious membrane may be applied to screed without an epoxy primer (see manufacturer PDS) and efflorescence barrier is the application of the water based epoxy primer only. Allow 24 hours curing time before other trades progress with works.
-
Confirm Manufacturer has inspected application sequence and has at least identified 1 area to each level for the above activity (Substrate Preparation, Moisture Content, Membrane Application).
Final Inspection
-
Client Name & Signature:
-
Date:
-
APS Representative Name & Signature:
-
Date:
Photos
-
Photo 1
-
Photo 2
-
Photo 3
-
Photo 4
