Information

  • Add media

ITS Technologies & Logistics Safety Boot Inspection

Weekly Safety Footwear Check

  • Division

  • Location / Site

  • GPS Location
  • Conducted on

  • Person being Observed - Full Name

  • Employee Number

  • Prepared by - Full Name

  • Employee Number

Observation

ITS Technologies & Logistics Safety Boot Inspection

Weekly Safety Footwear Check

  • INSTRUCTIONS: Please check all boxes for condition of footwear (Safe or At-Risk) . Put detailed comments below for each At-Risk.

Safety Boot Inspection

  • 1.0 Boots Must be Lace-up Style - This is the only type approved for company use

  • 1.1 Boots must be Steel or Composite Toe<br>

  • 1.2 Boots must have all lace holes covered <br>

  • 1.3 Boots must be Tied correctly

  • 1.4 Boots must meet requirements - Vertical 6" or Above Ankle Type<br>

  • 1.5 Boots must meet requirements - Grip type-Non Slip Soles<br>

  • 1.6 Boots must have a well Defined Heel

  • 1.7 Boots over all must be in good condition to meet company requirements

  • 1.8 If Footwear Does not Pass this inspection - Employee will not be allowed to work until footwear meets reqiuements<br>Note: Comment must be made for the Item.

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.