KEL 002- Solar PV Quality Checklist

• Document No.

• Audit Title

• Client / Site

• Conducted on

  Date

• Prepared by

• Location
  Address

• Personnel

Mounting Frame and Fixing of Modules

• Is single fix inserted as per drawing, flat and on opposite crowns?

  Yes

  No

  N/A

• Add media

  Media

• Has EPDM Pads being inserted, if required underneath rail?

  Yes

  No

  N/A

• Add media

  Media

• Is rail firmly inserted onto rail and end caps installed on each row?

  Yes

  No

  N/A

• Add media

  Media

• Is there a minimum of 50mm overhang on rail from end of each module?

  Yes

  No

  N/A

• Add media

  Media

• Is all mid clamps and end clamps in place on each module and firmly fixed into position?

  Yes

  No

  N/A

• Add media

  Media

• Is there any defects picked on system that should be made known to contractor?

  Yes

  No

  N/A

• Add media

  Media

Containment

• Is exterior cable containment hot dip galvanised, all cuts sprayed and free from sharp edges?

  Yes

  No

  N/A

• Add media

  Media

• Is cables fixed onto tray, and cable tied at distance fo no more than 1.5m apart?

  Yes

  No

  N/A

• Add media

  Media

• Is containment bonded, if required to the local earthing system?

  Yes

  No

  N/A

• Add media

  Media

AC/DC Installation

• Is inverters securely fixed to wall, with manufacturer spacing between each inverter?

  Yes

  No

  N/A

• Add media

  Media

• Has appropriate rated AC isolator switch being installed beside inverter?

  Yes

  No

  N/A

• Add media

  Media

• Is labelling being installed to identify strings as per the design drawing?

  Yes

  No

  N/A

• Add media

  Media

• Has labelling being installed on cables/containment?

  Yes

  No

  N/A

• Add media

  Media

• Has AC Cabling being run in a neat manner to breaker on distribution board

  Yes

  No

  N/A

• Add media

  Media