Information
-
Conducted on
-
Training Centre Location
-
Engineer Name
-
Payroll Number
-
Assessor Name
Flat Roof Working
Flat Roof Working
-
Delegate will be required to safely access the flat roof using pre-installed ladders, access a working position within the safe area of the roof then access a working position within the unsafe area using a suitable restraint system
-
Correct use of any required PPE & Equipment
-
Correct Access Procedure
-
Understanding of 2 metre rule
-
Safely access the 2 metre area
-
Safe descent from the roof
-
Comments
Small Flat Roof Working
-
Delegate will be required to safely access the flat roof using pre-installed ladders and using any available Equipment, establish a safe working position on the roof.
-
Correct use of any required PPE & Equipment
-
Correct Access Procedure
-
Safe use of RSL to establish a working position on the Small Flat Roof
-
Comments
Pitched Roof Working
Pitched Roof Working
-
Delegate will install the roof ladders to access the chimney on the roof of the training house. once secured they will access the roof and secure to the chimney strop
-
Correct use of PPE
-
Establishing a safe lifting position
-
Safe and controlled installation of roof ladders
-
Roof Ladders correctly secured to access ladders
-
Safe climbing and descending of the Roof Ladders
-
Safely access the chimney
-
Safe removal of the Roof Ladders
-
Comments
Sign Off
Engineer Declaration of Competence
-
I fully understand the control measures, Safe Systems of Work (SSOW) and risk assessment procedures adopted by Home Service & Supply
I understand the correct method of carriage and setup of triple section ladders and am competent to do so
I understand the need for and process required for Risk Assessments
I have been practically assessed on access to both Pitched Roofs and Flat Roofs and am competent to do so
I understand the procedure for accessing a Dormer Roof
I understand where asbestos may be found and the correct action that should be taken if its presence is suspected
I understand that I must wear company provided uniform and PPE items ONLY
I understand that I must check my Health & Safety Equipment before each use
I understand that I must escalate to my manager any situation which I am unsure of prior to and work being performed -
Document Signed on:
-
Engineer Name:
Trainer Sign Off Record
-
Observed by:
