Is there cattle panels in place around production tree?
Is the house casing and measurement casing anchored together? (Is it anchored midway)
Is the walking/working surface smooth and free of obstruction in the entrance and/or location?
Are the weeds controlled?
Is the facility fenced or blocked off?
Is an emergency number posted?
Is the entrance signage properly displayed on location?
Is the battery for the scavenger inside the skid area?
Are there H2S signs in the appropriate areas?
Is there a PPE Required sign on location?
Is the flare stack area free of obstructions and debris?
Are there chains with signage across stairs? (Chains and signs will be put on the stairways only when the H2S is 10 ppm and higher)
Structural support good? Stairways and Catwalks in good condition? (Any steps that contains 3/4 of an inch damaged, must be removed and replaced)
Does the tank(s) have NFPA labels?
Are the tanks/load lines grounded
Are there any signs of leaks from the Balon Valves, load lines or tank outlets? (Within the tank area)
Do the thief hatches close and latch properly?
Are the cam lock hose couplings on the load lines functional and not damaged or worn down?
Is the Enardo Valve in place?
Are the thief hatch gaskets in good condition?
Is there a wind sock in place? ( wind sock will be set out only on H2S locations)
Are there lightning eliminators in place?
Are the Berms/Firewalls in good condition?
Is there a working Murphy Meter/other gauge in place? ( Murphy Meters will only be set up when the H2S level is 10 ppm and higher)
Level indicators functioning and not damaged?
Has the Pineapple been inspected? (Pineapples will be inspected only when in use so there will be a decal indicator notifying if in use or N/A)
Are the pressure gauges in good condition?
Are weep holes in place on low and high pressure separators?
Are the relief valves anchored?
Is the scavenger chemical being utilized?
Is the Scavenger free of leaks/spills?
Does the Scavenger have a Pressure Relief Valve in place to assist in releasing restored pressure?
Is the battery and all connection not inside the skid containment?
Is the compressor unit(s) have hearing protection sign signs?
Is the compressor grounded?
Is the compressor oils leaks contained within the skid?
Is the skid or area free of debris?
Is the overall condition of the facility safe?
Is the fire extinguisher checked and inspected?
If the location is a Soar Well, is there a SCBA properly staged with signage?