Title Page
-
Address
-
Conducted on
-
Engineer name
- Dave Carson
- Dominic Hughes
- Tom Branch
- Karl King
- Chris Hoban
- Sean Willams
- Kevin Green
- Martin Crudden
- Graham Roche
- Lee Kuya
- Ste McCoy
- Ste Richardson
- Glyn Murray
- Jon Fagan
- Kevin Williams
- Mark Williams
- Rob Jones
- Ste Wareing
- John Stone
- Carl Fairhurst
- Tony Miller
-
Carried out by
-
Engineer Gas safe card present
-
what is expiring date
-
why not
Protocol
-
Did Engineer arrive at appointed time
-
What time did he arrive
-
Did customer receive SMS prior to appointment
- Yes
- No
- N/A
-
Did Engineer indentify himself
- Yes
- No
- N/A
-
Did engineer show ID card
- Yes
- No
- N/A
-
Did engineer explain what work would be carried out prior to proceeding
- Yes
- No
- N/A
Techincal Inspection
-
Meter Location
- internal
- external
-
Has the engineer visually checked appliances before starting AGS
- Yes
- No
- N/A
-
Did the engineer ask customer if there where any issues with appliances
- Yes
- No
- N/A
-
Has the engineer checked exposed metal around meter/applliance with an approved volt stick?
- Yes
- No
- N/A
-
Safe isolation must be carried out for your safety
-
Does the ECV fall to off?
- Yes
- No
- N/A
-
Did the engineer follow the correct process and contact gas provider
-
CAT2 G23 ECV does not fall to off
-
Is the ECV accessible and operable?
- Yes
- No
- N/A
-
Can the installation safely continue?
-
Has gas providor been notified and installation capped, warning notices issued
-
engineer to carry out works
- Yes
- No
- N/A
Testing and Isolation
-
Has the engineer correctly performed the initial LET-BY test?*-
- Yes
- No
- N/A
-
Why not,Evidence opertive doing this operation
-
Has the engineer correctly performed the initial TIGHTNESS TEST?
- Yes
- No
- N/A
-
Was there a pressure drop?
-
is the drop within permissible limits
- Yes
- No
- N/A
-
has meter been capped and work order raised, warning notice issued
-
Engineer to continue with AGS
-
evidence operative doing this operation
-
Did the engineer check the Standing pressure test at meter
-
Prompt
-
record reading
-
Did the engineer carried the working pressure test at meter
- Yes
- No
- N/A
-
confirm readings
-
Evidence him doing in
-
Has engineers carried AGS to satifactory Standard
-
has standing pressure test been carried on all landlords appliances
- Yes
- No
- N/A
-
Have all Gas regulation 29/6 been carried out and recorded on LGSR
- Yes
- No
- N/A
-
Gas Rate
-
observe engineer carring out tests
- Yes
- No
- N/A
-
Have all observations been recorded on LGSR
- Yes
- No
- N/A
-
Has the engineer correctly performed the final TIGHTNESS TEST?
- Yes
- No
- N/A
-
Advise to carry out
-
Has the engineer correctly used LDF on the installation and carefully wiped off after
-
Advise to carry out
-
Auditor obsevations
Completion Process
-
Please provide details of any unsafe situations identified
- ID
- AR
- N/A
-
Details
-
what action has been
-
What action has been taken
-
Where the engineer identified a fault with the installation, did they notify the customer and inform them of the appropriate next steps?
-
door step protocol not applied appropriately
-
Has handheld been completed correctly?
-
Data incorrectly submitted,Handheld unit incorrectly used
-
Did the engineer leave the site as found?
-
Provide details
-
Audit outcome
-
reason failure
-
Have you provided any coaching during the site visit?
-
Please provide any good feedback observed during the site visit
-
Signed by Engineer