MAG BFM - Door QA

• Conducted on

  Date

• Prepared by

• Di.00 Reference

Door Frame

• Frame fixed as per manufacturers specification?

  Yes

  No

  N/A

• Is the door frame sealed using correct intumescent sealant. If the frame to wall gap is greater than 10mm are the correct fire stopping materials used?

  Yes

  No

  N/A

• Is the frame to door leaf gap consistently 3mm?

  Yes

  No

  N/A

Door Seals

• Are seals continuous and free from damage?

  Yes

  No

  N/A

Door Closers

• Is the closer securely attached to the door and the frame?

  Yes

  No

  N/A

• If hung in pairs, do they close in line if both are opened and released together?

  Yes

  No

  N/A

• Does the hold open device release the door when required?

  Yes

  No

  N/A

Glazing & Glass

• Is the intumescent seal continuous and attached to the glass and bead?

  Yes

  No

  N/A

• Are the glazing beads well attached to the frame and free from damage?

  Yes

  No

  N/A

• If specified, is peep hole at correct height.

  Yes

  No

  N/A

Threshold Gap

• Is there a consistent gap under the door that allows it to swing without touching the floor covering?

  Yes

  No

  N/A

Ironmongery

• Is the correct ironmongery set installed, inclusive of signage?

  Yes

  No

  N/A

Certification

• Certifire BM TRADA Q Mark?

  Yes

  No

  N/A

Comments / Defects Identified

• Enter any Comments / Defects Identified here

Photos of finished door

• Insert Photos of finished door and frame

  Media