Title Page
-
Date of assessment:
-
Assessment performed by:
-
Location
Safe Job Procedures: Material Testing @ the LAB
-
1. Utilize heat resistant gloves
-
2. Employ SWP 5 – EXTREME TEMPERATURES
-
3. Dispose of materials at approved location.
-
4. Utilize SWP 11 – PROLONGED REPETATIVE MOTION while using the Marshall Hammer.
-
5. Avoid throwing the hammer, tap the hammer to the top of device and release, keep fingers clear at all times
-
6. Wear face/eye and hearing protection
-
7. Employ SWP - 15 – SAW OPERATION
-
8. Utilize tongs and welding gloves to place basket in the NCAT oven.
-
10. Do an equipment check. • Vehicle equipped with safety light on roof. • Fluorescent vest • Other PPE when required (boots, hardhat, safety glasses etc.) • Radios • Pencil and log book • Calculator • Measuring equipment (if necessary)
-
11. Wear all other required PPE (boots, safety glasses, hard hat) as per supervisor’s orders.
Safe Work Practice: Material Testing @ the LAB
-
1. Ensure you are conversant with emergency evacuation.
-
2. Ensure proper type of fire extinguisher is available.
-
3. Ensure that all electrical cords are in good condition and are not overloaded.
-
4. Dispose of tested materials in a manner acceptable to the leaser.
-
5. Ensure the lab is locked when leaving unattended.
-
6. Hearing protection shall be employed when operating the asphalt saw, Marshall Hammer and any instance where levels exceed 85 dB for an 8 hour period.
-
7. Avoid unnecessary exposure to high temperatures.
-
8. Gloves shall be worn when handling heated materials, including but not limited to: asphalt pans, asphalt spatulas, thermometers, heated gravel pans or Marshall Molds.
-
9. Utilize air conditioning/open windows when lab temperatures are uncomfortable.
-
10. Alternate hands when performing repetitive tasks (ie. Marshall hammer)
-
11. Take breaks as necessary.
-
12. Approved safety equipment such as glasses or face shields and hearing protection must be worn. All loose fitting clothing to be removed or secured when operating the asphalt saw.
-
13. Equipment shall be inspected and maintained as per the Manufacturer’s specifications.
-
14. Report deficiencies/damage to Supervisor.
-
15. Damaged equipment, tools or materials shall be noted, tagged as ‘DO NOT USE’ and placed in the storage garage. Fill out Damaged Equipment form.
-
16. Defective tools shall be discussed at monthly health & safety meetings
HAZARD ASSESSMENT AND CONTROL
Hazard assessment and control
-
Hazards:
- Traffic volume
- Weather condition
- Wildlife
- spill potential
- awkward body positions
- slips/trips
- noise in area
- dust/mist/fumes
- tools and equipments
- extreme temperatures
- other workers in the area
- ETC
-
LIKELIHOOD
-
SEVERITY:
-
Plans to eliminate/ control:
-
DATE IMPLEMENTED:
-
Hazards:
- Traffic volume
- Weather condition
- Wildlife
- spill potential
- awkward body positions
- slips/trips
- noise in area
- dust/mist/fumes
- tools and equipments
- extreme temperatures
- other workers in the area
- ETC
-
LIKELIHOOD
-
SEVERITY:
-
Plans to eliminate/ control:
-
DATE IMPLEMENTED:
-
Hazards:
- Traffic volume
- Weather condition
- Wildlife
- spill potential
- awkward body positions
- slips/trips
- noise in area
- dust/mist/fumes
- tools and equipments
- extreme temperatures
- other workers in the area
- ETC
-
LIKELIHOOD
-
SEVERITY:
-
Plans to eliminate/ control:
-
DATE IMPLEMENTED:
-
Hazards:
- Traffic volume
- Weather condition
- Wildlife
- spill potential
- awkward body positions
- slips/trips
- noise in area
- dust/mist/fumes
- tools and equipments
- extreme temperatures
- other workers in the area
- ETC
-
LIKELIHOOD
-
SEVERITY:
-
Plans to eliminate/ control:
-
DATE IMPLEMENTED:
-
Hazards:
- Traffic volume
- Weather condition
- Wildlife
- spill potential
- awkward body positions
- slips/trips
- noise in area
- dust/mist/fumes
- tools and equipments
- extreme temperatures
- other workers in the area
- ETC
-
LIKELIHOOD
-
SEVERITY:
-
Plans to eliminate/ control:
-
DATE IMPLEMENTED:
-
Hazards:
- Traffic volume
- Weather condition
- Wildlife
- spill potential
- awkward body positions
- slips/trips
- noise in area
- dust/mist/fumes
- tools and equipments
- extreme temperatures
- other workers in the area
- ETC
-
LIKELIHOOD
-
SEVERITY:
-
Plans to eliminate/ control:
-
DATE IMPLEMENTED:
-
Name & Signature:
-
Name & Signature:
-
Name & Signature: