Information
-
Store Number (0000) and Name
-
Engineer Name
-
Address (GPS Location)
-
Date of Survey
-
Store Type
Survey
-
Identity the location the scales are to be placed. Refer to guide to determine response.
- Delivery Kitchen Counter
- CotF
- Option 1
- Option 2
- Option 3
- Option 4
- Option 5
- Option 6
- Option 7
- Option 8
- Option 9
- Option 10
- Option X
-
Is there space on the table top (not counter), where the dips, napkins and straws are located? Ensure there is nothing in the way to snag the scales.
-
What is wrong?
-
Take photo of the area to show the issue
-
Is there a suitable table available for the scales to sit on? Table is 475mm wide
-
What is wrong? E.g. No Table, Table too small, Space obstructed by shelf etc.
-
If no table, assume a table will be provided and is in place. Measure the gap between table and wall / equipment to ensure adequate staff access.
-
Is there a double electric socket, easily accessible, within 1m of where the scales will be located?
-
Photo of electric socket location
-
Attach label to the wall, where the socket should go. Socket should be 1.2m from floor.
-
Take a photo of the wall and label, where the socket is to be located.
-
Check the WiFi Signal next to where the scales will be located
-
What is the signal strength?
Summary
-
Could the installation go ahead without any changes required
-
What needs to happen?
Managers Sign Off
Store Manager Completion Sign Off
-
McDonalds Representative Position (ie Store Mgr/Shift Mgr)
-
Manager Name and Signature
-
Engineer Comments?
