Meadow Gold -Fire Extinguisher Inspection

Information

Conducted on
Prepared by

1. Building Exterior by RO Area

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up.
Extinguisher was turned upside down at least three times. (Shaken)

2. Engine Room by exterior man door.

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up.
Extinguisher was turned upside down at least three times. (Shaken)

3. Main Hallway across from Control Room

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily
Safety pin is in place and intact. Nothing else should be used in place of the pin.
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”<br>
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

4. Air Compressor Room by man door

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up.
Extinguisher was turned upside down at least three times. (Shaken)

5. Downstairs Electrical Room by exterior man door

Add media
It is mounted in an easily accessible area, with nothing stacked around it
Label is readable and displays the type of extinguisher and the instructions for use
Safety Pin is in place and not damaged.
Handle is intact and not bent or broken
Pressure gauge is in the green and not damaged or showing “recharge”
Discharge Hose/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build
Extinguisher was turned upside down at least three times. (Shaken)

6. Downstairs Electrical Room by interior man door

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety Pin is in place and not damaged
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”.
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

7. Maintenance Room on Shop Bench

Add media
It is mounted in an easily accessible area, with nothing stacked around it
Label is clear and extinguisher type and instructions can be read easily.
Safety Pin is in place and not damaged
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”.
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build
Extinguisher was turned upside down at least three times. (Shaken)

8. Maintenance Room by exterior man door

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up.
Extinguisher was turned upside down at least three times. (Shaken)

9. Maintenance Room attached to TIG welder

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up.
Extinguisher was turned upside down at least three times. (Shaken)

10. Boiler Room by double doors to Maintenance Room

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

11. Receiving Bay by Entrance roll up door

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

12. Receiving Bay by Exit roll up door

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

13. Main Hallway by stairwell entrance next to Receiving Bay

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

14. Lab next to Plating Room door

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

15. Control Room

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

16. Processing Room next to Alcove

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

17. Processing Room next to roll up door

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

18. Production Room next to Alcove

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

19. Production Room next to roll up door

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

20. Cooler next to man door by floor conveyors

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

21. Cooler on wall by Bossy Cart Loader

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

22. Cooler on wall between Docks #6 and #7

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

23. Cooler on wall between Docks #4 and #5

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

24. On wall in Cooler Manager’s Office

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

25. Cooler on wall by 7-11 track

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

26. Case Dock by man door to Cooler

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

27. Case Dock by exterior roll up door

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

28. Case dock by Dock #13

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

29. Dry Warehouse by Case Dock man door

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

30. Dry Warehouse by Dock #12.

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

31. Main Hallway by door into Dry Warehouse

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it
Label is clear and extinguisher type and instructions can be read easily
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

32. Blowmold Room by Bagger/Debagger

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

33. Blowmold Dock by man door

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

34. Blowmold Room by Regrind Room door

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

35. Main Entrance Hallway by double doors

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

36. Break Room by fridge

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it
Label is clear and extinguisher type and instructions can be read easily
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

37. Downstairs Office by elevator

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it
Label is clear and extinguisher type and instructions can be read easily
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

38. Inside downstairs Elevator Room (Locked.)

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it
Label is clear and extinguisher type and instructions can be read easily
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

39. Upstairs Offices by Janitor’s Closet

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

40. Upstairs Offices across from Plant Manager’s Office.

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it
Label is clear and extinguisher type and instructions can be read easily
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

41. On Mezzanine by gated Electrical Access Hallway

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

42. On Mezzanine in gated Electrical Access Hallway across from VFDs

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

43. Upstairs Electrical Room by door

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

44. On Mezzanine Parts Room Access by gate

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

45. Upstairs above Processing Room across from Gate Access on Divider Wall

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

46. Outside Maintenance Manager’s Office by door

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it
Label is clear and extinguisher type and instructions can be read easily
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

47. Spare #1 in Maintenance Room

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

48. Spare #2 in Maintenance Room

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

49. Spare #3 in Maintenance Room

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)

50. Spare #4 in Maintenance Room

Add media
Mounted in an easily accessible place, no debris or material stacked in front of it.
Label is clear and extinguisher type and instructions can be read easily.
Safety pin is in place and intact
Handle is intact and not bent or broken
Pressure gauge is in the green and is not damaged or showing “recharge”
Discharge hoses/nozzle is in good shape and not clogged, cracked, or broken
It is not rusty, or has any type of corrosion build up
Extinguisher was turned upside down at least three times. (Shaken)