Title Page

  • Site conducted

  • Conducted on

  • Prepared by

  • Location

First Arrival

  • Check controllers for alarms

  • Make sure no CO2 tanks are empty, change if needed

  • Collect and test poolside samples

  • Unlock Exfoliation Building and turn on lights

  • Unlock Signature Sauna and turn on lights

  • Unlock Finnish Sauna and turn on lights

  • Unlock Tram house and set up entry way at 8AM

  • Log CO2 levels

Main Building Mechanical Room

Lower Hot Pool

  • UV lamps are on

  • Chlorine Generators are on

  • CO2 controller is on

  • Salt cell voltage is between 11.0 - 13.0

  • Visually inspect pump baskets, empty if needed

  • Enter flow rate going out to pool

  • Check Filter pressure, is Backwash needed?

  • Flow cell float is in proper position

Upper Hot Pool

  • UV lamps are on

  • Chlorine Generators are on

  • CO2 controller is on

  • Salt cell voltage is between 11.0 - 13.0

  • Visually inspect pump baskets, empty if needed

  • Enter flow rate going out to pool

  • Check Filter pressure, is Backwash needed?

  • Flow cell float is in proper position

Main Relaxation Pool

  • UV lamps are on

  • Chlorine Generators are on

  • CO2 controller is on

  • Salt cell voltage is between 11.0 - 13.0

  • Visually inspect pump baskets, empty if needed

  • Enter flow rate going out to pool

  • Check Filter pressure, is Backwash needed?

  • Flow cell float is in proper position

Cold Waterfall Pool

  • Chlorine Generators are on

  • CO2 controller is on

  • Visually inspect pump baskets, empty if needed

  • Enter flow rate going out to pool

  • Check Filter pressure, is Backwash needed?

  • Flow cell float is in proper position

Dual Steam Mechanical Room

Cold Plunge Pool

  • Chlorine Generators are on

  • CO2 controller is on

  • Visually inspect pump baskets, empty if needed

  • Enter flow rate going out to pool

  • Check Filter pressure, is Backwash needed?

  • Flow cell float is in proper position

  • Check CO2 tank level, Does it need replaced?

Cold Walkthrough Pool

  • Chlorine Generators are on

  • CO2 controller is on

  • Visually inspect pump baskets, empty if needed

  • Enter flow rate going out to pool

  • Check Filter pressure, is Backwash needed?

  • Flow cell float is in proper position

  • Check CO2 tank level, Does it need replaced?

Pool Deck

Upper Hot Pool

  • Empty Skimmer Baskets

  • Examine tiles for scum lines, scrub with sponge if needed

  • Examine coping around the pool for Algae growth, clean with bleach solution or cal-hypo granules and deck brush

  • Water level is halfway up the skimmer boxes

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.