Information
-
Store Number:
-
Store Name:
-
Conducted on
Ad-Hoc Works Sign Off
Installation Details
-
Store Number:
-
Store Name:
-
Time on site
-
Engineer Name:
-
Have you called Mission Control to advise of arrival onsite?
-
IF no, why not?
-
Have RAMS been reviewed and understood.
-
Have all aspects of work been completed?
-
IF no, why not?
-
Please insert before photo of DB, clearly showing all breakers
-
Insert photo of cabinet after works completed
-
List switch ports used for Logwood
-
Insert photo of Chef Screen and bump bar
-
Insert photo showing correct IP address ending in .84 and displaying the "M" in the top right corner.
-
Enter serial number for Chef Monitor (.84)
-
Insert photo of serial number for Chef Monitor (.84)
-
Enter Serial number of Pik Box for Chef Screen (.84)
-
Insert photo of Serial number of Pik Box for Chef Screen (.84)
-
Enter Serial number of Bump Bar for Chef Screen (.84)
-
Insert photo of Serial number of Bump Bar for Chef Screen (.84)
-
Insert photo of power and data for chef screen (.84)
-
Insert photo of labelled data outlet ( Log 1, Log 2 etc )
-
Insert photo of Servery Screen and bump bar (.85)
-
Insert photo showing correct IP address ending in .85
-
Enter serial number for Servery Monitor (.85)
-
Insert photo of serial number for Servery Monitor (.85)
-
Enter Serial number of Pik Box for Servery Screen (.85)
-
Insert photo of Serial number of Pik Box for Servery Screen (.85)
-
Enter Serial number of Bump Bar for Servery Screen (.85)
-
Insert photo of Serial number of Bump Bar for Servery Screen (.85)
-
Insert photo of power and data for servery screen (.85)
-
Insert photo of labelled data outlet ( Log 1, Log 2 etc )
-
Insert photo of 3rd Screen and bump bar (.86)
-
Enter serial number for 3rd Monitor (.86)
-
Insert photo of serial number for 3rd Monitor (.86)
-
Insert photo showing correct IP address ending in .86
-
Enter Serial number of Pik Box for 3rd Screen (.86)
-
Insert photo of Serial number of Pik Box for 3rd Screen (.86)
-
Enter Serial number of Bump Bar for 3rd Screen (.86)
-
Insert photo of Serial number of Bump Bar for 3rd Screen (.86)
-
Insert photo of power and data for 3rd screen (.86)
-
Insert photo of labelled data outlet ( Log 1, Log 2 etc )
-
State cable length of electrical cables
-
Has an additional power socket been installed for a new Microwave position?
-
Please insert Photo
-
Have Cafe Tills power cables been changed to Elecktrak plug tops?
-
IF no, why not?
-
How many Elecktrack plugs have been used?
-
Has a patch panel been used?
-
How Many wall brackets have been used?
-
How many stainless drops have been installed?
-
Have you installed a third screen?
-
Have Mission Control/Level 2 advised that the Logwood system has tested correctly?
-
IF no, why not?
-
List any issues encountered whilst onsite
-
List any spare kit used, i.e, pik box, bump bar, monitor.
-
Please insert after photo of DB, clearly showing all breakers
-
Has the site been cleaned to the standard of which it was upon arrival?
-
IF no, why not?
-
Has mission control been called to authorise departure from site?
-
IF no, why not?
-
Have Serial numbers been given to mission control?
-
IF no, why not?
-
Have all ports been labelled, Tidied Cab, and removed rubbish from site?
-
IF no, why not?
-
Mission control contact spoken to:
-
Time Leaving site
Customer Sign Off
Customer Sign Off
-
Elecomm Engineer Sign Off:
-
Store Manager/Supervisor Signature - Signature is taken as acceptance of work completed by the engineer