Information
-
Audit Title
-
Client / Site
-
Conducted on
-
Prepared by
-
Location
-
Personnel
17.0 Abrasive Wheel Equipment Grinders
-
17.1 Is the work rest used and kept adjusted to within 1/8 inch of the wheel?
-
17.2 Is the adjustable tongue on the top side of the grinder used and kept adjusted to within 1/4 inch of the wheel?
-
17.3 Do side guards cover the spindle, nut, and flange and 75 percent of the wheel diameter?
-
17.4 Are bench and pedestal grinders permanently mounted?
-
17.5 Are goggles or face shields always worn when grinding?
-
17.6 Is the maximum revolutions per minute (rpm) rating of each abrasive wheel compatable with the rpm rating of the grinder motor?
-
17.7 Are fixed or permanently mounted grinders connected to their electrical supply system with metallic conduit or pther permanent wiring method?
-
17.8 Does each grinder have an individual on and off control switch?
-
17.9 Is each electrically operated grinder effectively grounded?
-
17.10 Are new abrasive wheels visually inspected and ring tested before they are mounted?
-
17.11 Are dust collectors and powered exhausts provided on grinders used in operations that produce large amounts of dust?
-
17.12 Are splash guards mounted on grinders that use coolant to prevent the coolant from reaching employees?
-
17.13 Is cleanliness maintained around grinders?
Sign Off
-
On site representative
-
Auditor's signature
