Information

  • Job # / Job Name

  • Conducted on

  • Prepared by

  • Location
  • Document No.

FIRST AID

  • Is company provided first aid equipment available on site and with paint shop set up and fully stocked?

  • Are first aid trained coworkers on site?

  • Are coworkers aware of the address of the site and the nearest hospital?

JOB SITE ACCESS & CONTROLS

  • Have controlled access zones (CAZ) been established around work areas? To include traffic and pedestrian controls?

HOUSEKEEPING & SANITATION

  • Is general neatness of working areas aceptable?

  • Are passageways and walkways clear and free of debris?

  • Is temporary storage of materials and supplies done in a organized fashion?

PERSONAL PROTECTIVE EQUIPMENT (PPE)

  • Are hard hats being worn and worn properly?

  • Are proper steel toe boots utilized for foot protection?

  • Is eye protection on at all times?

  • Is respiratory protection being used when conditions require them?

  • Is hearing protection being used by coworkers that may be exposed to noisy conditions?

  • Are coworkers using proper hand protection?

  • Are all staff and visitors are wearing Hi-Viz vests or jackets.<br>Ensure Hi-Viz clothing is not damaged.

  • Are respirators stored and worn properly?

Fall Protection

  • Are lanyards in good working conditions and clasps functioning properly?

  • Are lifelines installed and secured properly?

  • Are rope grabs in good working order?

  • Are retractable lanyards functioning and in good working order?

  • Are harnesses being worn properly with fit and adjustment straps?

  • Have harnesses been inspected quarterly by a competent person and initialed?

FIRE PROTECTION & PREVENTION

  • Are extinguishers readily accessible and near any gas powered equipment? (no closer than 10 feet)

  • Do fire extinguishers have current inspection tags?

  • Are all flammable liquid containers metal cans that are UL or FM listed?

HAZARD COMMUNICATION

  • Are SDS sheets maintained on each product in use?

  • Are SDS labels on each chemical container that is unmarked.?

DUST, GASES, VAPORS, FUMES & MISTS

  • Is adequate ventilation provided?

  • Is protective equipment used to protect against over-exposure?

LIFTING OPERATIONS

  • Has the jobsite been walked to identify ground hazards(drop-offs, slopes and holes)?

  • Are the Manufacturers operating manual & ANSI manual of responsibilities onboard?

  • Have safety zones been established around lift swing radius with safety cones?

  • Have all overhead obstructions or hazards been identified?

  • Have controlled access zones been established under boom arm for protection?

  • Have The operators had the appropriate training?

  • Is lift positioned on solid level ground

  • Is the lift equipment been inspected daily before use?

  • Are the lifting operations at a minimum clearance of 20" from the power lines

  • Everyone in the lift basket standing firmly on the floor, wearing proper fall protection or protection equipment?

HAND TOOLS

  • Are tools neatly stored and accessible when not in use?

  • Are tools being carried safely?

  • Is the proper hand tool used for the task?

  • Are hand tools and other equipment regularly inspected for safe conditions?

POWER TOOLS & POWDER ACTUATED TOOLS

  • Are power tools inspected before use?

  • Are tools inspected for frayed and damaged cords?

  • Are tools and cords properly grounded and are ground pin in good condition?

  • Are rotating or moving parts of equipment guarded to prevent contact by coworker?

  • Are all hoses on air or hydraulic tools in good condition?

ELECTRICAL

  • Are extension cords free of nicks, gouges or cuts?

  • Are cords ends inspected for proper grounded prongs?

  • Are power cords protected in traffic ways?

  • Are GFCI's and/or assured equipment grounding conductor programs being used?

  • Lockout / tagout devices available and used on circuits that could be come energized?

LADDERS

  • Are the ropes in good working condition and pulley functioning properly on extension ladders?

  • Are manufactures labels and safety warning labels intact/readable?

  • Are step ladders fully open when in use?

  • Are ladder rungs in good condition, none missing or broken?

  • Are safety shoes/cleats on the bottom of the ladder?

  • Is the proper foundation present at base of ladder?

  • Are ladders properly secured to prevent slipping, sliding or falling?

  • Do side rails extend 36" above top of each landing?

  • Are portable ladders used at such a pitch that the horizontal distance from the top bearing to the foot of the ladder is about 1/4 of the working length of the ladder?

  • Are areas around the top and bottom of the ladder kept clear?

Notes / Comments

Crew at time of inspection

Foreman / responsible party on site

  • Add signature

Completed by

  • Add signature

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.