Title Page

  • Document Number

  • Date of Inspection

  • Location

Inspection - As stated in Australian Standard 4084:2012, racking inspections are to be conducted by a ‘competent’ person. This could be your warehouse manager, your pallet racking manufacturer, or even a third party racking inspector.

Pallet Racking Inspection

  • Check every part of the frames, beams and accessories based on the traffic light system below:

    racking-inspection-traffic-light-system_.png
  • WorkSafe Victoria Guidance Note - pallet racking operation and maintenance

  • Rack Number - Add Photo

  • Select the type of pallets used in the racking.

  • Frames

  • Front uprights

  • Front base plates

  • Front shims

  • Rear uprights

  • Rear base plates

  • Rear shims

  • Bracing

  • Beams

  • Front beam

  • Front clips

  • Rear beam

  • Rear clips

  • Safety locks

  • Accessories

  • Shrink wrap

  • Upright guards

  • Row Spacer

  • SWL Signage

  • Pallets

  • Pallet condition

  • Pallet position

  • Weight distribution

Completion

  • Additional recommendation

  • All of the stocks located on pallets are checked for any damage.

  • Full Name and Signature of Pallet Rack Inspector

  • Full Name and Signature of Pallet Rack Inspector

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.