Introduction
-
Please identify the area you are inspecting and your name.
-
Area inspected
-
Conducted on
-
Prepared by
Visual Inspection
-
For each question please add any information required to support the maintenance of the area..
-
When looking and listening to drains in sinks, tubs, and showers, is a slow drain or gurgling identified?
-
Are visible pipes and joints checked for signs of corrosion, such as bluish-green deposits on brass and copper, or rust on iron and steel?<br>
-
Are all toilet seats free from damage?
-
Are there any signs of leakage from showers, toilets or sinks?
-
Are shower heads and taps free of scale or debris.
Preventative Maintenance
-
Are the Shut off valves on water supply lines under fixtures working as they should
-
Are p-traps under sinks cleaned out to protect against future clogs?
-
While checking under sinks, is a thorough inspection for leaks or signs of damage, such as stains, mildew, warping, or peeling conducted?
-
When trying to move or rock toilets without using too much force, is movement checked, and if present, are the mounting bolts at the base tightened?
-
Are tank lids off toilets removed to check for obvious signs of wear or damage to parts?
Temperature Check
-
Run the outlets for 4 minutes or for as long as it takes for the temperature to regulate.
-
Hot Tap
-
Cold Tap
-
Shower (from valve)
-
Instant Hot Water boiler
