Title Page
-
Document No.
-
Plant Induction Checklist
-
Site Location
-
Conducted on
-
Person Conducting Plant Induction
-
Type of Plant
-
Plant ID
PLANT DETAILS
-
Make
-
Model
-
Serial Number
-
Registration (when applicable)
-
Last Service
-
Next Service Due
-
Service history
PLANT OWNER DETAILS
-
Employer
-
Directorate
-
Operator Name
-
License No.
PLANT OPERATORS DETAILS
-
Plant Operators license or competency
DOCUMENTATION CHECKLIST
-
Operators manual with Plant
-
Logbook- with Plant and current
-
Full service, maintenance and repair history provided
-
Provide evidence that any maintenance and repairs were performed to the manufacturers specifications
-
Refer to Operators manual for required service intervals
-
Risk Assessment in Plant and attached to this checklist
-
Risk Assessment attachment
-
Risk Assessment complete- if SC does not have one complete on IBC Initial Plant Risk Assessment
-
Load charts- if lifting
-
Operator Training and Competency for this particular Plant
VISUAL INSPECTION CHECKLIST
-
Motion beeper is adequate
-
Flashing light working and visible
-
Fire extinguisher fitted and current (when applicable)
-
Load chart fitted in cabin (if used for lifting)
-
Tyres and Tracks in good condition- no obvious or visible signs of damage to treads and sprockets
-
Roll Over Protection system (ROPS) fitted - cabin, roll cage or similar
-
Falling Object Protection system (FOPS) - cabin or similar enclosure
-
Seatbelt or fall restraint fitted (when applicable)
-
All controls are clearly labelled, marked and operating- including lights, horns, brakes
-
All warning labels fitted to the Plant (crush zones, pinch points, etc.) as per risk assessment
-
Safe Work Loads (SWL) are clearly marked
-
No obvious signs of oil leaks
-
All hot surfaces guarded- engine and exhaust
-
Inspect attachment points, quick hitch attachments and safety pins for any obvious signs of damage, cracking distortion or wear
-
Quick hitch safety pins are in place