QC Checklist for Wood Framing

• Document No.

• Audit Title

• Client / Site

• Conducted on

  Date

• Prepared by

• Location
  Address

• Personnel

Stored Materials

• Are materials stacked and stored to prevent weathering and warping?

  Yes

  No

  N/A

• Are materials stacked according to OSHA guidelines?

  Yes

  No

  N/A

• Are materials staged on solid surface to avoid tilting and rocking?

  Yes

  No

  N/A

Walls Interior and Exterior

• Are interior walls plumb?

  Yes

  No

  N/A

• Is required blocking for fire/mounting/nailing installed per plan?

  Yes

  No

  N/A

• Are all blocking and backing flush with face of framing?

  Yes

  No

  N/A

• Are walls squared?

  Yes

  No

  N/A

• Are correct headers installed for load bearing walls/ non load bearing walls?

  Yes

  No

  N/A

• Are correct amount of kings and cripple studs installed?

  Yes

  No

  N/A

• Are sheer walls sheeted and nailed off according to schedule?

  Yes

  No

  N/A

• Is weather barrier installed and fastened to withstand weather and wind?

  Yes

  No

  N/A

• Are walls free of brace blocks and nails?

  Yes

  No

  N/A

• Are walls fastened to substrate with correct fasteners?

  Yes

  No

  N/A

• Are all required brackets/holddowns/anchors installed per plan and schedule?

  Yes

  No

  N/A

• Do all hold down posts match required schedule for ply size?

  Yes

  No

  N/A

Floor System

• Has layout been verified?

  Yes

  No

  N/A

• Are correct hanger brackets used for floor system?

  Yes

  No

  N/A

• Are the correct floor joists series installed per plan?

  Yes

  No

  N/A

• Do all joists meet minimum bearing depth?

  Yes

  No

  N/A

• Is all rim board installed to support joists?

  Yes

  No

  N/A

• Are joist toe nailed to plates?

  Yes

  No

  N/A

• Are hold down clips installed per plan?

  Yes

  No

  N/A

Rafter System

• Has rafter layout been verified?

  Yes

  No

  N/A

• Are rafter installed per plan?

  Yes

  No

  N/A

• Are lateral braces installed per plan?

  Yes

  No

  N/A

• Are correct hanger and hold down clips installed per schedule and rafter plan?

  Yes

  No

  N/A

• Are rafter cords and members free of splits and cracks?

  Yes

  No

  N/A

• Are press plate seated with out kinks and bends?

  Yes

  No

  N/A

Ceilings

• Are joists the correct size per plan?

  Yes

  No

  N/A

• Are joist hangers installed according to plan and materials used?

  Yes

  No

  N/A

• Are joists confirmed to be under span?

  Yes

  No

  N/A

• Are joists crowned all the same direction?

  Yes

  No

  N/A

• Are ceilings framed flat and level?

  Yes

  No

  N/A

• Is ceiling framing clear of bracing and nails?

  Yes

  No

  N/A