Information

  • WSAH Kit Number

  • WSAH Kit Location

  • Inspection Location

  • Location
  • Conducted on

  • Inspected By

  • Assisting Personnel

Inspection - 100m Rope

  • Any failed responses should be raised with your Group Leader & an "Out Of Service" tag placed on the rope bag.

Rope Information

  • Enter date of Manufacture (refer Kit Equipment Register in kitbag)

  • Is this date within 10 years of today's date?

  • Enter "Date Of In-Service" (refer Kit Equipment Register in kitbag)

  • Rope colour:

  • Are the rope identification tags still attached on the ends of the rope?

  • Add photos of the rope's identification tags (check the ends of the rope)

Rope Condition

  • Free of Cuts?

  • Free of Frays & Abrasions

  • Free of Broken Fibers?

  • Clean & free of dirt, oil, paints, etc?

  • Free of Mold?

  • Free of Burns?

  • Free from shock damage? (damage from shock loading, falls, etc)

  • Add photos of any damage on the rope.

Overall inspection Info:

  • IF INSPECTION REVEALS ANY DEFECTIVE CONDITION, REMOVE FROM SERVICE AND DESTROY.

  • Is this rope OK to remain in service?

  • Has the new compliance tag been inscribed with the next inspection date?

  • Add photos of the compliance tag(s) here.

  • Signature of Inspector

Inspection - 50m Rope

  • Any failed responses should be raised with your Group Leader & an "Out Of Service" tag placed on the rope bag.

Rope Information

  • Enter date of Manufacture (refer Kit Equipment Register in kitbag)

  • Is this date within 10 years of today's date?

  • Enter "Date Of In-Service" (refer Kit Equipment Register in kitbag)

  • Rope colour:

  • Are the rope identification tags still attached on the ends of the rope?

  • Add photos of the rope's identification tags (check the ends of the rope)

Rope Condition

  • Free of Cuts?

  • Free of Frays & Abrasions

  • Free of Broken Fibers?

  • Clean & free of dirt, oil, paints, etc?

  • Free of Mold?

  • Free of Burns?

  • Free from shock damage? (damage from shock loading, falls, etc)

  • Add photos of any damage on the rope.

Overall inspection Info:

  • IF INSPECTION REVEALS ANY DEFECTIVE CONDITION, REMOVE FROM SERVICE AND DESTROY.

  • Is this rope OK to remain in service?

  • Has the new compliance tag been inscribed with the next inspection date?

  • Add photos of the compliance tag(s) here.

  • Signature of Inspector

Inspection - Tape Rope 1m #1

  • Any failed responses should be raised with your Group Leader & an "Out Of Service" tag placed on the rope bag.

Rope Information

  • Enter date of Manufacture (refer Kit Equipment Register in kitbag)

  • Is this date within 10 years of today's date?

  • Enter "Date Of In-Service" (refer Kit Equipment Register in kitbag)

  • Are the rope identification tags still attached on the ends of the rope?

  • Add photos of the rope's identification tags (check the ends of the rope)

Rope Condition

  • Free of Cuts?

  • Free of Frays & Abrasions

  • Free of Broken Fibers?

  • Clean & free of dirt, oil, paints, etc?

  • Free of Mold?

  • Free of Burns?

  • Free from shock damage? (damage from shock loading, falls, etc)

  • Add photos of any damage on the rope.

Overall inspection Info:

  • IF INSPECTION REVEALS ANY DEFECTIVE CONDITION, REMOVE FROM SERVICE AND DESTROY.

  • Is this rope OK to remain in service?

  • Has the new compliance tag been inscribed with the next inspection date?

  • Add photos of the compliance tag(s) here.

  • Signature of Inspector

Inspection - Tape Rope 1m #2

  • Any failed responses should be raised with your Group Leader & an "Out Of Service" tag placed on the rope bag.

Rope Information

  • Enter date of Manufacture (refer Kit Equipment Register in kitbag)

  • Is this date within 10 years of today's date?

  • Enter "Date Of In-Service" (refer Kit Equipment Register in kitbag)

  • Are the rope identification tags still attached on the ends of the rope?

  • Add photos of the rope's identification tags (check the ends of the rope)

Rope Condition

  • Free of Cuts?

  • Free of Frays & Abrasions

  • Free of Broken Fibers?

  • Clean & free of dirt, oil, paints, etc?

  • Free of Mold?

  • Free of Burns?

  • Free from shock damage? (damage from shock loading, falls, etc)

  • Add photos of any damage on the rope.

Overall inspection Info:

  • IF INSPECTION REVEALS ANY DEFECTIVE CONDITION, REMOVE FROM SERVICE AND DESTROY.

  • Is this rope OK to remain in service?

  • Has the new compliance tag been inscribed with the next inspection date?

  • Add photos of the compliance tag(s) here.

  • Signature of Inspector

Inspection - Tape Rope 3m #2

  • Any failed responses should be raised with your Group Leader & an "Out Of Service" tag placed on the rope bag.

Rope Information

  • Enter date of Manufacture (refer Kit Equipment Register in kitbag)

  • Is this date within 10 years of today's date?

  • Enter "Date Of In-Service" (refer Kit Equipment Register in kitbag)

  • Are the rope identification tags still attached on the ends of the rope?

  • Add photos of the rope's identification tags (check the ends of the rope)

Rope Condition

  • Free of Cuts?

  • Free of Frays & Abrasions

  • Free of Broken Fibers?

  • Clean & free of dirt, oil, paints, etc?

  • Free of Mold?

  • Free of Burns?

  • Free from shock damage? (damage from shock loading, falls, etc)

  • Add photos of any damage on the rope.

Overall inspection Info:

  • IF INSPECTION REVEALS ANY DEFECTIVE CONDITION, REMOVE FROM SERVICE AND DESTROY.

  • Is this rope OK to remain in service?

  • Has the new compliance tag been inscribed with the next inspection date?

  • Add photos of the compliance tag(s) here.

  • Signature of Inspector

Inspection - Tape Rope 3m #1

  • Any failed responses should be raised with your Group Leader & an "Out Of Service" tag placed on the rope bag.

Rope Information

  • Enter date of Manufacture (refer Kit Equipment Register in kitbag)

  • Is this date within 10 years of today's date?

  • Enter "Date Of In-Service" (refer Kit Equipment Register in kitbag)

  • Are the rope identification tags still attached on the ends of the rope?

  • Add photos of the rope's identification tags (check the ends of the rope)

Rope Condition

  • Free of Cuts?

  • Free of Frays & Abrasions

  • Free of Broken Fibers?

  • Clean & free of dirt, oil, paints, etc?

  • Free of Mold?

  • Free of Burns?

  • Free from shock damage? (damage from shock loading, falls, etc)

  • Add photos of any damage on the rope.

Overall inspection Info:

  • IF INSPECTION REVEALS ANY DEFECTIVE CONDITION, REMOVE FROM SERVICE AND DESTROY.

  • Is this rope OK to remain in service?

  • Has the new compliance tag been inscribed with the next inspection date?

  • Add photos of the compliance tag(s) here.

  • Signature of Inspector

Inspection - Harness 1

Harness Info:

  • Label Attached to Harness<br>

  • Label Fully Legible

  • HARNESS Date of Manufacture:

  • HARNESS Serial #

  • HARNESS Lot #

  • HARNESS Model #

  • Add photo of harness identification tag here

Hardware:

  • Buckles in Place?

  • D Rings in Place?

  • Back Pad in Place?

  • Loop Keepers in Place?

Hardware Condition:

  • Free of Damaged or Worn Parts?

  • Free of Broken or Bent Parts?

  • All Buckle Springs Loose?

  • Free of any Sharp Edges?

  • Free of Burrs?

  • Free of Cracks?

  • Parts free of distortion and elongation?

  • Free Corrosion?

  • Add photos of any hardware issues here.

Webbing:

  • Free of Cuts?

  • Webbing free of Frays?

  • Free of Broken Fibers?

  • Free of Broken Stitches?

  • Free of Tears?

  • Free of Abrasions?

  • Free of Mold?

  • Free of Burns?

  • Add photos of any webbing issues here.

Overall inspection Info:

  • IF INSPECTION REVEALS ANY DEFECTIVE CONDITION, REMOVE FROM SERVICE AND DESTROY.

  • Is this harness OK to remain in service?

  • Has the new compliance tag been inscribed with the next inspection date?

  • Add photos of the compliance tag(s) here.

  • Signature of Inspector

Inspection - Harness 2

Harness Info:

  • Label Attached to Harness<br>

  • Label Fully Legible

  • HARNESS Date of Manufacture:

  • HARNESS Serial #

  • HARNESS Lot #

  • HARNESS Model #

  • Add photo of harness identification tag here

Hardware:

  • Buckles in Place?

  • D Rings in Place?

  • Back Pad in Place?

  • Loop Keepers in Place?

Hardware Condition:

  • Free of Damaged or Worn Parts?

  • Free of Broken or Bent Parts?

  • All Buckle Springs Loose?

  • Free of any Sharp Edges?

  • Free of Burrs?

  • Free of Cracks?

  • Parts free of distortion and elongation?

  • Free Corrosion?

  • Add photos of any hardware issues here.

Webbing:

  • Free of Cuts?

  • Webbing free of Frays?

  • Free of Broken Fibers?

  • Free of Broken Stitches?

  • Free of Tears?

  • Free of Abrasions?

  • Free of Mold?

  • Free of Burns?

  • Add photos of any webbing issues here.

Overall inspection Info:

  • IF INSPECTION REVEALS ANY DEFECTIVE CONDITION, REMOVE FROM SERVICE AND DESTROY.

  • Is this harness OK to remain in service?

  • Has the new compliance tag been inscribed with the next inspection date?

  • Add photos of the compliance tag(s) here.

  • Signature of Inspector

Inspection - Hardware

Carabiners & Rescue-8's

  • Are carabiners free of corrosion & physical damage? (select all that are)

  • Are carabiners free of corrosion & physical damage? (select all that are)

  • Are Rescue 8's free of corrosion & physical damage? (select all that are)

Descender 1 (Kong Backup)

  • Free of Damaged or Worn Parts?

  • Free of Broken or Bent Parts?

  • Ribbed friction arm not smooth?

  • Free of any Sharp Edges?

  • Free of Burrs?

  • Free of Cracks?

  • Parts free of distortion and elongation?

  • Free Corrosion?

  • List parts requiring replacement (if any)

Descender (Kong Backup)

  • Free of Damaged or Worn Parts?

  • Free of Broken or Bent Parts?

  • Ribbed friction arm not smooth?

  • Free of any Sharp Edges?

  • Free of Burrs?

  • Free of Cracks?

  • Parts free of distortion and elongation?

  • Free Corrosion?

  • Do any parts require replacement?

  • List parts requiring replacement (if any)

Miscellaneous Components

  • Is there AT LEAST 3 rope protectors in the kit?

  • Is there AT LEAST 1 throw bag in the kit?

  • Is the kit clipboard present with safety checklists, kit equipment register, last inspection record, slope gauge & SEM0604 Working Safely At Heights participant guide?

Hardware Condition:

  • Free of physical damage and deformities?

  • Free of corrosion?

  • All markings present and legible?

  • Are locking levers free of damage and operate smoothly?

Overall inspection Info:

  • IF INSPECTION REVEALS ANY DEFECTIVE CONDITION, REMOVE FROM SERVICE AND DESTROY.

  • Is the kit OK to remain in service?

  • Has the new compliance tag been inscribed with the next inspection date?

  • Add photos of the compliance tag(s) here.

  • Signature of Inspector

Sign Off

  • Are there any other issues with the heights kit that needs to be raised?

  • Add photos of any other issues here.

  • Do any items need reordering?

  • List items here that require reordering. Also advise your Groups' Asset Manager.

  • Add photos of kit re-tagged here.

  • Sign that this inspection is true, correct & completed to the best of your ability.

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.