Audit

Pre-arrival Preparation
Offload Instructions:

Demonstrates an understanding of the offload instructions:

Identify rolling stock requirements:

Identify Priority baggage locations and sequence of offloading:

Identify various cargo commodities and offload sequence.

Correctly completes offload message indicating any discrepancies as per operators SOPs.

Gate Preparation

Conducts pre arrival crew briefing:

Assigns set up and arrival duties as required:

Ensures gate area properly equipped and equipment safely staged for arrival. FOD Walk completed.

Ensures loaders are correctly configured for applicable aircraft type:

Conducts briefing with inbound baggage runner ( when available ) regarding the sequence of baggage offloading.

Ensure guidance system set for applicable aircraft type:

Ensure passenger loading bridge(s) in correct position:

Checks with airline ops agent when possible for further specific instructions:

Arrival and Offload

Demonstrates areas of concern during post arrival walkaround:

Demonstrates correct chock and cone placement as per Operators SOPs:

Demonstrates correct door opening procedures:

Demonstrates a knowledge of forward and aft container and pallet configurations and associated locking protocols:

Understands aircraft anti-tipping requirements during offloading.

Understands GPU, CAU AND APU requirements:

Understands lav and water service protocols:

Identify APU hazard area and APU fire panel location and operation:

Identify fuel panel(s) and fuel vent location.

Layover and Overnight requirements:

Demonstrates cabin door operation and precautions:

Understands placement of portable GPU, CAU and Passenger Stairs:

Understands removal of equipment and door closure on extended layovers:

Onload and Departure:

Conducts crew briefing prior to on load.

Demonstrates a knowledge of forward and aft container and pallet configurations and associated locking protocols:

Understands aircraft anti-tipping requirements during loading:

Understands removal of equipment and door closure procedures:

Demonstrates proper towbar and connection protocols:

Demonstrates proper pushback tractor and connection protocols:

Demonstrates areas of concern during pre-departure walkaround including FOD walk:

Demonstrates ability to perform safe pushback and disconnect procedures:

Post Departure:

Ensures load sheet completed, signed and returned to Airline Operations Agent.

Ensures gate area clear of equipment

Summary

Trainee confirmation.
Select date
I confirm that I have received training on the elements indicated above. I will comply with the instructions and procedures within this module,
Method of assessment.

Training / Assessment administered via:

Trainer / Auditor
Add signature
Please note that this checklist is a hypothetical example and provides basic information only. It is not intended to take the place of, among other things, workplace, health and safety advice; medical advice, diagnosis, or treatment; or other applicable laws. You should also seek your own professional advice to determine if the use of such checklist is permissible in your workplace or jurisdiction.