RRL - ToolBox Talks -Hand Trucks/Pallet Jack Use

Hand Trucks/Pallet Jack Use
Introduction: The hand trucks/pallet jacks are very versatile, but can be dangerous if not used properly. This equipment is designed to transport loads, unload, lift, pick, stage, and store materials or product. Workers operating walk trucks/pallet jacks may be injured by the pallet jack rolling over feet, hands caught between the operating handle and a fixed object, and heavy loads falling onto the operators.
To safely operate this equipment, basic safety principles below must be rigorously followed. By following these guidelines, you will ensure your safety and the safety of others.
Main points:
• Only pallet jack operators may operate pallet jacks.
• Do not exceed the manufacturer’s load capacity rate and read the lift capacity plate on the pallet jack if you’re unsure.
• Start and stop the pallet jack gradually to prevent the load from slipping.
• Pull manual pallet jacks and push them when going down an incline or passing close to walls or obstacles.
• If your view is obstructed, ask a spotter to assist in guiding the load.
• Stop the pallet jack if anyone gets in your way.
• Never place your feet under the pallet jack.
• Never use a second piece of equipment to push, pull, or, lift the unit.
• Move slowly when transporting an empty unit that could tip while negotiating a sharp turn.
• Always wear the required personal protective equipment.
• Keep hands, feet, and other body parts confined to the running lines of the hand truck/pallet jack.
• Never ride on pallet jacks.

Now go to section "Toolbox talk attendee register"

Toolbox talk attendees -

Please report to your supervisor to discuss your concerns.