Title Page

  • Site conducted

  • Date of Manufacture

  • Serial Number

  • Date and Time of Inspection

  • Inspected by

Harness Equipment Inspection

General Information

  • Location of Harness

  • Which Area?

  • Take a photo of the equipment

  • Is the equipment within its obsolescence date

  • LOLER Tag number

Equipment Type

  • Which Equipment are you inspecting

Full Body Harnesses

  • Does the legible tag identify the harness, model, date of manufacture, name of manufacturer, limitations and warnings

  • Take a photo of it

  • Nylon webbing is free of cuts, burn marks, and chemical damage

  • Harness has and is kept out of direct sunlight

  • Harness shows no sign of UV Damage

  • Webbing is free of tears, broken fibers, frayed edges, and pulled stitches

  • Harness webbing has no additional holes

  • Anchor points show no signs of deterioration

  • D-rings are free of excessive wear, pits, deterioration, cracks, and sharp edges

  • D-rings pivot freely

  • Buckles are not deformed or cracked, and will operate correctly

  • All grommets are secure and not deformed

  • All rivets are tight and not deformed

  • Tongue/straps show no excessive wear from repeated buckling

Lanyard

  • Does the legible tag identify the harness, model, date of manufacture, name of manufacturer, limitations and warnings

  • Take a photo of it

  • Type of Lanyard

  • Lanyard is free of cuts, abrasions, burn marks, and chemical damage

  • Harness has and is kept out of direct sunlight

  • Harness shows no sign of UV Damage

  • Lanyard is free of tears, broken fibers, frayed edges, and pulled stitches

  • Lanyard adaptor is free of signs of deterioration, heat damage, and stretching

  • Lanyard was tested to verify that the locking mechanism is operating correctly

Karabiner

  • Karabiner has no hook and eye distortions

  • Karabiner have no cracks and pitted surfaces

  • Karabiner latches are not be bent, distorted, or obstructed

  • Keeper latches seat into the nose without binding

  • Keeper springs securely close the keeper latches

  • Locking mechanism was tested to verify that keeper latches lock properly

  • All rivets are tight and not deformed

  • Tongue/straps show no excessive wear from repeated buckling

Fall Arrest

  • Does the legible tag identify the harness, model, date of manufacture, name of manufacturer, limitations and warnings

  • Take a photo of it

  • Nylon webbing is free of cuts, burn marks, and chemical damage

  • Harness has and is kept out of direct sunlight

  • Harness shows no sign of UV Damage

  • Webbing is free of tears, broken fibers, frayed edges, and pulled stitches

  • Webbing has no additional holes

  • Buckles are not deformed or cracked, and will operate correctly

  • All grommets are secure and not deformed

  • All rivets are tight and not deformed

  • Tongue/straps show no excessive wear from repeated buckling

  • Lanyard is free of cuts, abrasions, burn marks, and chemical damage

  • Lanyard is free of tears, broken fibers, frayed edges, and pulled stitches

  • Lanyard adaptor is free of signs of deterioration, heat damage, and stretching

  • Lanyard was tested to verify that the locking mechanism is operating correctly

  • Lifeline Pack is in good condition and has not been activated

Recommendation

  • Overall Rating

  • Write down your recommendation

Completion

  • Inspected by (Name and Signature)

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.